This Article Applies to:

ER7212PC V1 1.1.3 Build 20240403

Issue Description/Phenomenon:

A few users reported that after the ER7212PC firmware is upgraded to ER7212PC(UN) V1 1.1.3 Build 20240403 if some operations such as device firmware upgrade and downgrade, site migration, Force Provisioning, etc. have been performed, the Controller will do a full configuration to AP, the AP will appear to not broadcast the SSID.

Available Workarounds/Solutions:

We have released 1.1.4 firmware to fix this issue on the official website: https://static.tp-link.com/upload/firmware/2024/202404/20240425/ER7212PC(UN)_v1_1.1.4_20240423.zip

Please note that this version of the firmware is functionally identical to ER7212PC(UN)_V1_1.1.2 Build 20240102.

We recommend customers who have already upgraded to ER7212PC(UN)_v1_1.1.3_20240403 to upgrade this version of firmware. If you are still using ER7212PC(UN)_V1_1.1.2 Build 20240102, you can skip the firmware upgrade.

Thank you for your attention!

Update Log:

Apr 25th, 2024:

Release of this article.

Feedback:

If this was helpful, welcome to give us Kudos by clicking the thumbs-up button below.

If the solution doesn't work for you, your case is probably different from what is described here.

In that case, please feel free to click Start a New Thread and elaborate on the problem so that we can try to help you further.

Thank you for your great cooperation and patience!

TP-Link Support Team