Pharos Wireless Bridges
TP-Link Pharos Outdoor CPEs are dedicated to Point-to-(Multi)Point transmission, ideal for short-to-medium range wireless communication among two or more locations. Anything related to Pharos Outdoor CPEs, welcome to ask questions, join discussions and share your experience/knowledge here.
Pharos Wireless Bridges
This is my current plan with my hotspot. I want to make my CPE610 to boost connection to connect it with my repeater (CPE510). I am currently using voucher authentification. And it seems that CPE610 c
By
GamayPitoy
· Latest post 2020-10-26 23:43:25
by GamayPitoy
0Helpful
1330Views
Hi, I've got a CPE 210 in Client mode connected to another one in AP mode and an ethernet cable between my root router and the AP LAN port. So the internet connection is ok. But when I connect a secon
0Helpful
1520Views
Pharos firmware version 2.2.2 has been released that fixed some serious bugs: 1.Fixed the problem that CPE might crash caused by stack overflow. 2.Fixed the compatibility problem with MikroTik AP. 3.F
1Helpful
5232Views
Hello guys, How can I limit the bandwidth / rate of the client with the client's mac address? Do i need to use a router and set the limit of the client from the router? If so, what router should I use
By
Heujenthro
· Latest post 2020-10-19 15:02:57
by Heujenthro
0Helpful
723Views
Hi, I have just installed CPE200 to cover my garden with WiFi. I have specifically bought this router because it should support Passive PoE passthrough on LAN 1 port accordinf to the tech specs. The r
0Helpful
2004Views
Hello I have a problem with my CPE220 wich randomly freeze or the firmware is crashing, at random times, but not too often. I cant connect to it by wifi or lan and the solution is to reboot the CPE. A
By
cristianvdr
· Latest post 2020-10-15 20:46:44
by cristianvdr
0Helpful
2017Views
Hi , i have problem with a cpe 210 A.P . so , when i try to connect the pc , i have error wrong pass , the password is correct of course , ( some device connect well) , others like pc , wifi extender
0Helpful
3858Views
I have two CPE210 devices as a bridge between two buildings, about 125 feet apart. Signal strength on client -40db. SNR 68db. I can run the speedtest tool and get 160 Mbps. One the AP side, on a compu
By
idealtrucks
· Latest post 2020-10-14 12:16:11
by idealtrucks
0Helpful
1674Views
Client end of connection corrupts connection for multiple cameras. Ip 192.168.0.201 works fine 192.168.0.202 or any other connection dissapears when the client is connected to the network. 192.168.0.1
0Helpful
333Views
Here is my setup. I have three wireless access points configured. Arris (cable modem) 192.168.0.1 Hitman (hardwired back to Arris) 10.65.9.1 TP-Link_Outdoor (hardwired back to Arris) 10.10.9.1 Arris a
By
Hitman1965
· Latest post 2020-10-13 03:39:38
by Fae
0Helpful
456Views