Switches
TP-Link Business Switches are comprised of JetStream series and LiteWave series, which are designed to offer reliable and professional choices to businesses of all sizes. Anything related to TP-Link's JetStream or LiteWave Switches, welcome to ask questions, join discussions and share your experience/ knowledge here.
Switches
I have SFP into the prem that can sync at either 2.5g or 1g. Does tp-link have any switches that support 2.5 on sfp? If not, I could use a media converter from another manufacturer to convert the sfp
0Helpful
597Views
I have a problem where JetStream switches (T1700X-16TS and T1700G-28TQ) are not properly passing traffic when using ports with tagged 802.1Q VLANs. When using untagged VLANs, there are no problems. Wi
0Helpful
886Views
I have fiber to the home. The ISP Ethernet carries IPTV on VLAN ID 4 and Internet. I configured the Switch as follows: Port 1 : VLAN ID 2 (untagged) Connected to : Internet Service Provider VLAN ID 4
0Helpful
791Views
I'm trying to use this switch's PoE function to power TL-WA1201 V2 AP. The AP doesn't turn on any of the 1-8 PoE enabled ports. It works with its included PoE injector over the same cable. I even test
0Helpful
666Views
Hi All, I am fairly new to the Forums, but I wanted to share with you a quirk or strange thing I found with the TL-SG105PE that might help others. As you can see from the attached diagram this is my c
By
TL-SG105PE
0Helpful
473Views
i need the following information on tplink-28PS: 1. Account Lockout Policy 2. Invalid Login Attempts 3. Account lockout duration 4. Idle Session Timeout
1Helpful
696Views
I put the TP-Link between the ISP Ethernet port and my router, this because I want to split the IPTV before it's going into the router. Port 1 is connected to the ISP Ethernet port (Internet and IPTV)
0Helpful
521Views
Hardware: T2600G-18TS & EdgeRouter ERX -SFP Multiple VLANs Question; Is it worth setting up MVR Snooping with a T2600G-18T switch connected (router on a stick mode) to an Edge Router and one trunk wit
0Helpful
772Views
Hi, I need a help! I'm using the switch to manage an internet network, from which two computers and a camera are connected via NDI. On the first day and second day, everything went very smoothly, with
0Helpful
479Views
Router is configured for DHCP on VLAN ID 100 on port 15 which is connected to Switch 2 port 15. I assume I need to configure port 15 as tagged with PVID 100 and should be combined with port 13 what sh
0Helpful
560Views