Switches
The online documentation references the old web interface, not the new one. The firewall houses the DHCP Server that has three VLANs (A1, B2, C3) that hands out DHCP addresses. The SG2210P uses Port 1
VLAN & Multi-NetworksACLVLAN / WAP / Switch
0Helpful
704Views
Hello. I'm trying the problem on the switch it doesn't start the system. In the COM console I have already reset and select another backup image even so it does not start and gives the following error
Firmware UpdateACL
0Helpful
1531Views
I configure the following ACL to allow only ARP and IPv4 traffic: > Jetstream#show access-list > MAC access list 100 name: "Allow IP" > rule 10 permit logging enable type 0800 > rule 20 permit logging
ACL
1Helpful
3680Views
I have created two VLANS (in addition to the default VLAN 1): VLAN2000: 192.168.20.0/24 VLAN4000: 192.168.2.0/24 I created an IP ACL with the following rules: Deny, Source: 192.168.2.0, 255.255.255.0
VLAN & Multi-NetworksACL
0Helpful
1171Views
Hello, following the this post I have the same problem with a TL-SG3428XMP. Unfortunately I can't find any suitable firmware (also BETA) that offers me a solution. Does anyone know? Thanks Update: ACL
VLAN & Multi-NetworksACLFirmware Update
0Helpful
1275Views
Hello all, I have a TL-SG3428MP and I'm quite happy with my configuration so far. Now I have a question regarding ACL. I set up the hardware in my office just to test everything. See the infrastructur
ACL
By
StefanDevernon
· Latest post 2021-08-26 01:20:57
by Fae
1Helpful
3023Views
Dear Community, I'm looking for tips on how to construct an an ACL to apply on a specific port do the following: - allow all traffic to the router (192.168.1.1) - deny all traffic to/from the local su
Highlighted ThreadACL
1Helpful
3875Views