Gateways
I noticed (already a while ago) when I turn the DPI function of my gateway on some sides, such as the one from "Kärcher" or "Automobilwoche" take forever to load.. even when in the VLAN of the device
By
Julian2111
· Latest post Yesterday
by Hank21
0Helpful
480Views
I do have a problem with ER605v2 2.3.3 and IPSec VPN traffic. When there is a traffic through VPN during the router boot, the traffic is blocked permanently. The issue goes as follows: 1) From the LAN
VPN
0Helpful
109Views
So I have 100mb+ on the ethernet from my starlink going into my ER605 router on WAN1, but when I ran speed test on ports 2 to 5 all I get is a dreadful 40mb or less every time. Am I missing something
0Helpful
417Views
I recently bought my ER811 and am working on configuring it for the first time. My small business network has 5 static IPv4 addresses from Verizon; Verizon tells me that IPv6 addresses are still unava
WAN SetupNAT
0Helpful
334Views
Hi! I'm thinking about an er8411 to replace my opnsense-box. For this to happen I do need to have vpn-tunnels being configured as gateways for some vlans. Mr. Google told me that this isn't possible!?
VPNVLAN & Multi-NetworksPresales
By
DerTom
· Latest post Saturday
by Pablo_Escobare
0Helpful
371Views
I have a ER605 gateway with a OC300 controller and multiple EAPs. I have a 1gig down/up fiber connection with supplied modem from our Internet provider. I don't seem to have any issues with my compute
RoutingNetwork ConnectivityFirewallDNS
0Helpful
172Views
I'm getting the following error in software controller 6.1.0.19 trying to configure my gateway (ER707-m2) with port forwarding: "Cannot create a port forwarding rule with the same Interface, Source Po
RoutingNATControllerFirewall
4Helpful
236Views
I have wireguard configured on the gateway acting as a VPN server. The "Local IP Address" on the gateway's wireguard config (10.16.16.1) is set to a subnet unused by any of the existing VLANs. There i
VPNRoutingWireGuard
1Helpful
328Views
DHCP Relay is broken in ER8411(UN)_V1_1.3.6 Build 20251028 when we shutdown the device Model: ER8411 Hardware Version: V1 Firmware Version: ER8411(UN)_V1_1.3.6 Build 20251028 The DHCP Relay functional
DHCP Service
0Helpful
105Views
The EP8411 v1.0 with firmware 1.3.6 is connected to three internet providers. The network is managed by an OC300 controller. Once every few weeks or less, users experience internet outages. External a
Network Connectivity
0Helpful
250Views
I Used ChatGPT to write this post because English is not my native language and its too technical to write a good post my self. The Problem I'm experiencing a strange intermittent HTTPS connection fai
0Helpful
1447Views
I have 3 ER706W-4G v2.0, one set as hub, and the other 2 set as spoke devices, but 1 spoke device is not connecting to the hub. The following error messages appear in the log, WAN2: Phase 1 of IKE neg
VLAN & Multi-NetworksNetwork ConnectivitySD WAN
By
Alfred_DOMO
· Latest post Friday
by MR.S
0Helpful
142Views