Access Point/Client config and placement for CPE210
Access Point/Client config and placement for CPE210
Access Point/Client config and placement for CPE210
2019-01-31 20:15:22 - last edited 2019-02-01 01:17:12

Hello, I have installed two CPE 210's. They are only a 100ft apart......do I need to set the distance for that?

 

Also, the way these are mounted, one is about a foot from the electrical panel, will that cause interference??

 

Thanks

0
0
#1
Options
1 Reply
Re:Access Point/Client config and placement for CPE210
2019-02-01 01:30:39

Magduck wrote

Hello, I have installed two CPE 210's. They are only a 100ft apart......do I need to set the distance for that?

 

Also, the way these are mounted, one is about a foot from the electrical panel, will that cause interference??

 

Thanks

Dear customer,

Thanks for the kind feedback.

You can set the distance manually in the distance setting field, normally the distance setting should be 1.1 times of the real distance.

For the mounted method, normally the wireless signal will not be affected.

Thanks.

0
0
#2
Options