CPE-510 and EAP-225

CPE-510 and EAP-225
CPE-510 and EAP-225
2019-06-29 17:52:43
Model: CPE510
Hardware Version:
Firmware Version:

I have had nothing but issues with this setup 

was hoping someone could help 

it’s gotta be something I’m doing wrong 

 

I have as follows 

 

1. Internet (head-end) with a 

CPE-510 plugged into router and mounted on the side of the home (set up as an access point)

 

2. At this same location I have a EAP-225 installed for Wi-Fi coverage on that side of the home (set up as AP)

 

3. About 100ft away, in line of site 

another CPE-510 (set up as a Client) 

 

4. At #3 same location I have another EAP-225 set up as AP for Wi-Fi coverage in that area 

 

5. At #3 same location I have another CPE-510 (set up as an Access point) 

 

note: all three of these devices are plugged into a 5port ethernet gigabyte switch ..

 

6. About 200ft away in line of site I have another CPE-510 (set up as a client) 

 

7. At #6 same location I have another EAP-225 (set up as an AP) for Wi-Fi coverage in this area 

 

note: at this location I have an 8 port gigabyte switch with both of those devices plugged in as well as 2 DVR’s that are networked for remote viewing 

 

8. Also plugged into that switch in another CPE-510 setup and an AP

 

shooting about 60ft to 

 

9. Another CPE-510 set up as a client and plugged into a switch where I have a laptop and a Sonos play 5 plugged into it as well 

 

nothing ever seems to work properly 

maybe i over installed 

maybe not setup properly 

 

please, if anyone else works with these products let me know 

I will be happy to pay u for ur time 

 

as you most likely know , tech support is not really an option so I’m hoping to get help here 

 

thank you in advance 

0
0
#1
Options
3 Replies
Re:CPE-510 and EAP-225
2019-06-30 08:09:47

Safeandsoundlv wrote

please, if anyone else works with these products let me know

 

We use CPE510 and EAP225 exactly this way (CPE links to inter-connect several remote sites in one big network, EAP225 APs to distribute the WLAN locally at those sites).

 

So what is your question exactly? What is your exact setup of the CPEs? What is your network topology?

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
0
#2
Options
Re:Re:CPE-510 and EAP-225
2019-07-07 18:55:14

I’m not sure if the programming is 100% correct 

the set up

the placement of each 

Is very simple really

i have direct line of site the whole way

 

also

is there a way I can program each radio to be logged into wirelessly at all times if needed 

 

seems like the clients never come up on Wi-Fi network to log in to them 

but the AP’s do obviously 

 

i just don’t feel i should have any issues with this set up but 

I’ll get it all working for the most part 

And then a day or two later 

things just stop working 

0
0
#3
Options
Re:Re:Re:CPE-510 and EAP-225
2019-07-08 10:35:27

Not sure what you mean. Just use this network topology to connect remote WiFi cells to a local router (here a WBS and CPE, you can also use two CPEs):

 

 

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
0
#4
Options