Public IP routing with TL-R470T+

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Public IP routing with TL-R470T+

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Public IP routing with TL-R470T+
Public IP routing with TL-R470T+
2012-12-26 19:58:02 - last edited 2021-08-21 03:12:38
Region : Romania

Model : TL-R470T+

Hardware Version : V2

Firmware Version : 5.1

ISP :


Hi guy's ,

I need some help, i bought a TL-R470T+ and i have the above network configuration:

- direct connected ip from isp: 86.xx.xx.xx
- public subnet bought from my isp: 82.xxx.xx.128/25

The first router has on WAN: 86.xx.xx.xx and on LAN 1 : 86.xx.xx.128/26 , LAN 2: 10.0.0.1/24 .
My loadbalancer TL-R470T+ v2.1 it is connected to the first router through 10.0.0.1/24 and the first router it is set to send 86.xx.xx.191/26 as a public ip subnet to the load balancer .

The question is: How can i setup the TL-R470T+ to route the public ip-s that are received through WAN.

P.S: the 10.0.0.1/24 it is a private subnet, 86.xx.xx.xx and 82.xx.xx.128/25 are public ipv4

May someone help me with an idea? :)

Thank you!
  0      
  0      
#1
Options
9 Reply
Re:Public IP routing with TL-R470T+
2012-12-27 09:08:56 - last edited 2021-08-21 03:12:38
Set up the load balance function to have a try.
  0  
  0  
#2
Options
Re:Public IP routing with TL-R470T+
2012-12-28 05:03:14 - last edited 2021-08-21 03:12:38


I did set-up the load balance function and did not resolve the problem , i made some settings but ping packets reply through 86.xx.xx.xx (direct connected interface with my ISP) but i don't have ping with the ISP GATEWAY or other internet IP's , some other ideas?

@Kelly Thank you for your response!

I had added some picture for a clear view if someone can help...the load balancer has 10.0.0.2/24 on first WAN and on LAN: 82.xx.xx.194/26
  0  
  0  
#3
Options
Re:Public IP routing with TL-R470T+
2013-01-03 02:37:06 - last edited 2021-08-21 03:12:38
Hi guy's , is there someway to disable NAT on this router?
I need the classical statical routing function, so if nat is enable i can't do the things that i mentioned above.

Some guy's disable the nat function on TL-WR1043ND and that's a basic router ...so why not to disable nat in this router?
  0  
  0  
#4
Options
Re:Public IP routing with TL-R470T+
2013-01-03 14:25:35 - last edited 2021-08-21 03:12:38
S?a Laptop l?y li?n - uy tÃ*n - giá r?
  0  
  0  
#5
Options
Re:Public IP routing with TL-R470T+
2013-01-03 18:13:57 - last edited 2021-08-21 03:12:38

laptoptechcare149 wrote

S?a Laptop l?y li?n - uy tÃ*n - giá r?


Please in english ? :)

Thanks!
Br,
Vlad
  0  
  0  
#6
Options
Re:Public IP routing with TL-R470T+
2013-01-12 19:38:28 - last edited 2021-08-21 03:12:38
I'm back and answering my question , if this will help other users , the TL-R470T+ is not capable of classic routing, don't know why the developers from TP-LINK did not think about classic routing for this model, the single model that they are supporting classic routing is the: TL-ER6120 , i know that this router is a quarter from the price of TL-ER6120 but a simple classic routing function or a NAT Disable function will be grateful not just for me but for the whole network administrators !

I am a fan of TP-Link but i must tell you that i will stop buying products from them because in the technical manual they did not specified the NAT is a FIXED FUNCTION , so it's the buyer's problem if it can't use it without NAT.

I am really disappointed!

Best Regards,
Vlad T.
  0  
  0  
#7
Options
Re:Public IP routing with TL-R470T+
2013-01-13 17:37:14 - last edited 2021-08-21 03:12:38
Every devices has equivalent price for its feature and hardware inside. I remember my R488T cost me around $ 400+ but that was 3+ years ago. its feature was better than the R470T

ER5120 is better choice, im still undertesting using this ER5120. but most limitation that i experience in R470T+ has been resolved. I hope Tplink will release 7 WAN Load Balancing Router. much like Peplink. with Larger Policy Routing.
  0  
  0  
#8
Options
Re:Public IP routing with TL-R470T+
2013-01-16 15:17:38 - last edited 2021-08-21 03:12:38
Hi kailrusha ,

How the ER5120 works ? i read about it having some problems at the stability part like some people must restart it in 1 time in 15 days or things like this , for how long do you have it ?

Thanks,
Vlad
  0  
  0  
#9
Options
Re:Public IP routing with TL-R470T+
2013-02-03 03:23:48 - last edited 2021-08-21 03:12:38
Hi vlad turbuleasa.

I got mine for 1 month now, I upgraded it to the latest firmware version available and the Router works Stable. Just put your router in well ventilated area, or with cooling fan. I do restart Time to Time, its like taking a nap for a few minutes during morning when my business is close.

I like this router cause it always check if you have conflict in Policy Routing. Problem is You get only 64 entry.


There are other Router OS that can emulate as Router Load Balancing and Etc. and they are better than any TPlinks Products.

PFsense, Can Provide Web Cache, Load Balancing Base/Policy Routing for ( IPaddress, File Extention, URL, Protocol) It has too Bandwidth Limit base on URL or Protocol and File Extension

How Ever its Hard to Config if your an average PC User.

I Hope Tplink can add this Feature, Bandwidth Limit Base in URL or File Extension and Load Balancing with Policy Routing base in URL not Just IP Address
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 2819

Replies: 9

Related Articles