[Update 11/2020] Omada SDN Controller 4.2.4 for Devuan, Debian and other Linux systems
First Version: 2020-07-15
Last Update: 2020-11-20
In good old tradition of the community version of Omada Controller I just re-packaged latest Omada SDN Controller 4.2.4 for installation on Devuan, Debian and any other Linux system providing the dpkg installer.
There have been massive changes in the omadactl script and I took the opportunity to re-introduce switching between controller versions as introduced with Omada SW Controller V2.7 years ago. This means that you can install Omada SDN Controller without overwriting your existing controller and you can switch between all installed versions on the fly w/o the need to downgrade. I think this is handy if you want to just preview Omada SDN Controller for now.
However, it has its price: Omada Controller V3.2.10 needs to be updated, too, if you want to use this feature. What's more, only V3.2.10 is supported for switching, but future versions of SDN Controller community version will support this function, too (for this to work the version number of the software package needed to be moved to the package name). This means that the old versions will not automatically be removed when installing a new version. You can manually remove the old version if the newly installed one runs to your satisfaction.
Standard Disclaimer
The community version contains the original Omada SDN Controller from TP-Link, but with Privilege Separation enabled by default, as well as omadactl, which is an enhanced shell script used to start/stop and to manage the Omada SDN Controller server process. For a full list of the differences between the community and the official version see the section at the end of this post. TP-Link only supports their official version of the controller, but naturally this will affect the controller software in this community version, too. As for omadactl, this shell script is supported by me (R1D2) and bugs are fixed when reported.
Note that I can not give any support for installation of the software on a particular Linux system.
Please don't ask for step-by-step instructions or even videos on how to install the software. Every information needed to install the software is described in this post. If you cannot manage to get the software running on your Linux system, consider use of the OC200 or OC300 controller, which both also use Linux, but hide the details of the software setup.
Prerequisites
There are a few things to consider before installing Omada SDN Controller:
- As usual, you need Oracle JRE8, jsvc, mongodb, netstat (package net-tools) and curl.
Make sure you have those utilities installed before installing Omada SDN Controller. See the notes below.
- Important: If you want to adopt your EAPs, you need to update their firmwares.
See the posts from TP-Link in this forum and the Omada Controller Upgrade Guide which is included in the Omada SDN Controller package as well as attached to this post for your convenience.
MongoDB database
Omada SDN controller requires at least mongodb V3.2 or newer. The following packages are known to work (note the different package names!):
OS |
Package name |
Version (dpkg) |
---|---|---|
Devuan ASCII |
mongodb |
3.2.11-2+deb9u1 |
Debian 8 |
mongodb-org |
3.2.22 |
Debian 8 |
mongodb-org |
3.6.22 |
Note that only mongodb V3.2 or mongodb-org V3.2 supports both, the old Omada Controller V3.2.10 and the new SDN Controller V4.
- On Devuan ASCII just install the package mongodb from the repository.
- On Debian and related distributions follow the installation instructions on mongodb.org for either V3.2.22 if you want to switch between Omada Controller versions:
https://docs.mongodb.com/v3.2/tutorial/install-mongodb-on-debian/
- If you want run only Omada SDN Controller and need no compatibility of mongodb with Omada Controller V3.2.10, install mongodb-org V3.6 (or higher):
https://docs.mongodb.com/v3.6/tutorial/install-mongodb-on-debian/
Java Runtime Environment
It's recommended to use Oracle JRE. Some platforms offer a package in their repository, others don't. I prefer to donwload JRE8 from Oracle's website directly and to use the update-alternatives(8) mechanism to install the latest version. This is how it works:
- Download the 64-bit JRE for Linux (you don't need the full JDK).
- Extract the TAR archive into a directory of your choice (e.g. /opt/jvm).
- Install the JRE using update-alternatives:
update-alternatives --install /usr/bin/java java /opt/jvm/jre1.8.0_261/bin/java 261
Over the time your installed JRE packages might look like this:
# update-alternatives --list java
/opt/jvm/jre1.8.0_171/bin/java
/opt/jvm/jre1.8.0_181/bin/java
/opt/jvm/jre1.8.0_251/bin/java
/opt/jvm/jre1.8.0_261/bin/java
#
You can configure the version to use with the command update-alternatives --config java.
See the manpage of update-alternatives for more information.
Commons Daemon (jsvc)
You can try to install jsvc from the repository of your Linux distribution. However, last time I checked on Debian 8 jsvc required OpenJDK, which – if being installed – will configure itself as the default JRE using the update-alternatives mechanism. In this case I recommend to download the jsvc source and compile it instead of installing it via apt/apt-get. The jsvc binary actually does not require the OpenJDK, just the package jsvc is contained in depends on OpenJDK for whatever reasons.
Now for Omada SDN Controller: donwload the all-architectures .deb package
- Download the SDN controller from https://rent-a-guru.de/ftp/omada-sdn-controller-4.2.4_1_all.deb. Note the new package name, which starting with v4.2.4 contains the version number as part of its name.
- While you're at it, download the update for V3.2.10 from https://rent-a-guru.de/ftp/omada-controller_3.2.10-3_all.deb if you want to use switching between controllers. You can either install this update before or after installing the SDN Controller (see also the above note about mongodb versions supported by both, Omada Controller V3.2.10 and SDN Controller V4).
- Compare the checksums of the downloaded .deb files for integrity:
$ md5sum -b omada-sdn-controller-4.2.4_1_all.deb
a1d825befbb126dd9b868058205078a0 *omada-sdn-controller-4.2.4_1_all.deb
or:
$ sha256sum -b omada-sdn-controller-4.2.4_1_all.deb
d8414d75597322ecb7ca57cb293dfdfe7343f4e60365f8a6e6da09788ecfa77a *omada-sdn-controller-4.2.4_1_all.deb
- For the Omada Controller V3.2.10-3 package update:
$ md5sum -b omada-controller_3.2.10-3_all.deb
6b986ee67828d4c1e55d8dc6af1e8cbc *omada-controller_3.2.10-3_all.deb
or:
$ sha256sum -b omada-controller_3.2.10-3_all.deb
ef77aa88a3196d7663f35e59357a67833b86fa783923df480f56318ea84e5de2 *omada-controller_3.2.10-3_all.deb
Installation
Since SDN Controller has a new package name, your existing Omada Controller will not be overwritten, so it will retain all data. Again, read the Omada Controller Upgrade Guide to migrate your existing site to the new controller if you desire so.
Installing the V3.2.10 package update will also keep all settings, but to be on the safe site, make a backup before installing it. Please note that copying the database from an old controller to the new SDN Controller does not work; you need to migrate your site if you want to see the settings in the new controller.
Optional step (can be left out or executed at a later time if you're in a hurry): upgrade Omada Controller V3.2.10 if you have installed it:
dpkg -i omada-controller_3.2.10-3_all.deb
Now install Omada SDN Controller with the following command:
dpkg -i omada-sdn-controller-4.2.4_1_all.deb
Note that installing this package will overwrite the files /usr/bin/omadactl, /etc/init.d/omadad and /etc/default/omadad in an existing V3.2.10 installation if you left out the optional step above. Due to changes in Omada SDN Controller the locations of those files needed to be changed, too. They are now contained in Omada Controller's home directory (/opt/tplink/OmadaController).
In order to allow different versions of the Omada SDN Controller installed at the same time, the version number is now part of the package name. For example, your list of installed controller versions might look like this:
$ dpkg -l | fgrep omada
ii omada-controller 3.2.10-3 all Omada Controller for TP-Link's ...
ii omada-sdn-controller 4.1.5-2 all Omada SDN Controller for ...
ii omada-sdn-controller-4.2.4 1 all Omada SDN Controller for ...
$
Version switching
Now for the switching part. Try the following command (you can shorten »version« to just »v«):
$ omadactl -l version
Currently installed versions:
EAP Controller 2.7.0
Omada Controller 3.2.10
Omada Controller 4.1.5
Omada Controller 4.2.4 (current)
$
Next, try the switch command (as root):
# omadactl stop
Stopping Omada SDN Controller
# omadactl switch 3.2.10
Switched to 'OmadaController-3.2.10'. Now restart Omada Controller to activate it.
# omadactl switch 4.2.4
Switched to 'OmadaController-4.2.4'. Now restart Omada Controller to activate it.
#
That's my way of doing »downgrades« in just no time.
Starting/stopping the controller
You can start the controller synchronously (option -w) or asynchronously (no option) with omadactl:
# omadactl -w start
Starting Omada SDN Controller .................................................................................................
Omada SDN Controller started successfully after 43 seconds.
Direct your browser to http://your_hostname:8088 for accessing Omada SDN Controller.
#
On my embedded system it needs ~94 to ~99 seconds to start, on my Debian server it needs ~43 seconds, YMMV. You can specify a timeout with option -W sec when starting the controller synchronously and you can set the default timeout permanently with option -S sec (w/o starting the controller). The default timeout has been raised to 120 seconds for the SDN controller. The initial setup of the database will require more time at the very first start of Omada Controller.
To stop the controller use the stop command. To show it's status use the status command (obvious, isn't it?):
# omadactl stop
Stopping Omada SDN Controller
# omadactl status
Omada SDN Controller is not running
# omadactl start
Starting Omada SDN Controller
# omadactl status
Omada SDN Controller is still initializing, please wait ...
#
The script /etc/init.d/omadad will start the controller asynchronously at boot time to avoid delaying the boot sequence. You could use this command to start or stop the controller, too, but omadactl gives you much more functions. See the manpage for more information.
Changes in package omada-sdn-controller-4.2.4_1
- Moved version number to the package name to allow different versions of the same software to co-exist.
- Fixed double sourcing of OmadaController/CONFIG and /etc/default/omada in omadactl.
- Removed obsolete code from omadactl.
Changes in package omada-sdn-controller-4.1.5-2
- Fixed non-working verbose option (-v) in omadactl.
- Fixed dump and restore options of omadactl.
- Fixed bug in omadactl for getting properties.
- Fixed version dependencies for mongodb: The SDN Controller requires the package mongodb-org v3.2 or better.
Changes in package omada-sdn-controller-4.1.5-1
- Initial version.
- Modified omadactl to work with Omada SDN Controller.
Changes in package omada-controller-3.2.10-3
- Fixed non-working verbose option (-v) in omadactl.
- Fixed version dependencies for mongodb: The (old) Omada Controller requires either the package mongodb v2.4 or mongodb-org v3.2.
Changes in package omada-controller-3.2.10-2
- Changed location of duplicate files in different controller packages.
- Fixed version dependencies for mongodb to accept package mongodb-org.
Changes in package omada-controller-3.2.10-1
- Initial version.
More information
- For help with omadactl see its manpage: man omadactl
- For customization of omadactl see the config file CONFIG in the controller's home directory (/etc/default/omadad is gone).
- For a list of all files installed by the .deb package use the command: dpkg -L omada-controller
- If you want to uninstall this .deb package (except the database and other files created at run-time), use the »remove« option of dpkg: dpkg -r omada-controller
- If you want to uninstall this .deb package (including the database and other files created at run-time), use the »purge« option of dpkg: dpkg -P omada-controller
- For the release notes of Omada SDN Controller, the Omada Controller Upgrade Guide and the changelog for omadactl see the directory /usr/share/doc/omada-controller-4.1.5.
Differences and commonalities between official SDN Controller and Community Version (CV)
- The CV uses exactly the same JAVA class files from the official version, but is architecture-independend, that means it does not include any bundled binaries. Therefore you have to use up-to-date binaries for the required utilities which are most often installed on your Linux system anyway (curl, netstat, mongod, jsvc, java and a JRE of your choice). SDN Controller V4.1.5 finally removed previously bundled binaries as well as I always did suggest for its predecessors V2.x/V3.x.
- Official version 4.1.5 released 2020-07-13 has two bugs which prevent the controller from starting if Privilege Separation is used. If Privilege separation is not used, both bugs cause creation of a directory outside the Omada Controller's home directory with root ownership. Those bugs have been fixed in the CV already and have been reported to TP-Link.
- The CV automatically creates a role account »omadad« when installing the .deb-Package in order to enforce Privilege Separation, which is standard on UNIX/Linux for every server process started at boot time. To avoid the risk of potential root exploits you do not want to run the controller with admin privileges once it has been started.
- The CV uses improved shell scripts omadactl(8) and /etc/init.d/omadad for starting/stopping and managing the server. Both scripts replace the control.sh script found in the official version, which since version 3.x has incorporated a few critical, but not all mechanisms offered by omadactl.
- The CV's directory tree has much stricter file permissions which deny access for ordinary users to sensitive data such as certificates, properties, the controller's database and backups created with omadactl.
- The CV allows to have several controller versions installed at the same time and omadactl offers an easy way to switch between those instances on the fly.
- The CV uses the file CONFIG in Omada Controller's home directory for version- and system-dependend settings used by omadactl.
- omadactl allows to create backups from the command line using the mongodump(1) and mongorestore(1) utilities, thus enabling scheduled backups using the cron(8) daemon.
- omadactl allows to copy the database files from one version to another version, thus cloning the settings. Note: Direct database copies do not work for the transition from Omada Controller (V3) to Omada SDN Controller (V4).
- omadactl allows to raise or lower the Linux kernel's scheduling priority (niceness) for the Omada server process at start time or for an instance already running.
Enjoy! Sunshine!
Attached file: Omada Controller Upgrade Guide (also included in the package).
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
did you not cd /private before you ran get ... ?
entering "passive" will switch you too passive mode.
I can confirm I was able to download the file using ftp from Debian running on windows.
- Copy Link
- Report Inappropriate Content
I want to assure you i am not dictating how you serve up the files, i simply asked a question.
I at no point said i don't want to use FTP, nor did i say it's not a suitable method, it was a simple question about other protocols which for some reason you've taken as a person attack and this is not the intention whatsoever.
FYI I use Core FTP as my client - i use FTP very infrequently, but this is irrelevant - you prefer to use FTP as it serves your needs and this is personal choice and fine - i don't use FTP very often, in fact the only place i use FTP is to download the Omada controller software. I will consider using command-line to do this in future, it's a low priority for how often i use it though.
I am grateful for your work, you replies and you hosting the files - please note that, I truly am, as i am sure we all are.
Your reply about waiting 12 hours is all i needed to know, i will try again and thank you for this information.
Not that i have to explain myself, but so you and others who may also be interested know - and in line with a comment you made about scripts and scanning of sites - i block all outbound traffic on my firewall that is not required, so HTTP and HTTPS are fine, but because FTP is not a common protocol (for me), i block outbound connections - PASV uses random ports (unless you have a specific range configured), so my firewall rule may have rejected the connection on return causing me to get blocked - for now i have a rule that allows any port to and from your FTP.
Security is a key factor (even more so these days), hence your protocol choice, restrictions on connections and specific folder permissions - same for me on my network, including outbound - i do not have to share this information with you or anyone else, but given i have, you may now understand why i asked what i asked - and it's for the same reason you choose what you choose - security.
I do value your replies, you are a very helpful and knowledgeable person, but in the above post, you have completely misread my intentions.
- Copy Link
- Report Inappropriate Content
I'm using windows 10 ftp, which apparently behaves differently. I guess I need to try it from a linux system when I get time. I changed to both private and pub directories, the private refused the connection, and the pub said there was no such file or directory.
230- Welcome to the anonymous FTP server of RENT-A-GURU, Germany.
230- -------------------------------------------------------------
230-
230- Public files are in directory "pub". The directories "private"
230- and "incoming" are used for file exchange with customers. For
230- these directories no index listings are produced. If you have
230- problems using this service, contact ftpadm@rent-a-guru.net.
230-
230- It is now Sat Nov 21 16:13:30 2020 in Germany.
230- There are 1 users out of 10 allowed.
230- -------------------------------------------------------------
230-
230 Anonymous access granted, restrictions apply.
ftp> cd /private
250 CWD command successful
ftp> passive
Invalid command.
ftp> get omada-sdn-controller-4.2.4_1_all.deb
500 Illegal PORT command
425 Unable to build data connection: Connection refused
ftp>
- Copy Link
- Report Inappropriate Content
Thanks for your pointers - the 12 hour wait did the trick.
I now have the file, installed and restored my configuration
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
chili-bean wrote
Ok. It worked using debian. The lesson is, don't use the built in windows 10 ftp client.
Glad it worked finally.
Let me tell you an insider information: Microsoft crapware does everything to intentionally screw up open standards when interacting with open systems (i.e. UNIX, Linux) since the early 1980s. This affects all open Internet protocols, FTP, SMTP, HTTPS, TCP/IP, etc.
So it is not your fault if something doesn't work in Windows 10.
- Copy Link
- Report Inappropriate Content
@R1D2 I'm having issues with installing 4.2.4 over an existing 4.1.5-2.
Basically, after I install 4.2.4, it automatically switches to the newer version, but I'm presented with the wizard.. no configurations have migrated to 4.2.4..
Server is running Ubuntu 20.10 on x86_64 architecture.
luciano@home:~$ dpkg -l | fgrep omada
ii omada-sdn-controller 4.1.5-2 all Omada SDN Controller for TP- Link's EAP access points
ii omada-sdn-controller-4.2.4 1 all Omada SDN Controller for TP- Link's EAP access points
root@home:~# omadactl -l version
Currently installed versions:
Omada Controller 4.1.5
Omada Controller 4.2.4 (current)
Is there any extra steps if just upgrading from 4.1.5-2?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 49183
Replies: 139