CPE610 problem, limits speed at 30Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE610 problem, limits speed at 30Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE610 problem, limits speed at 30Mbps
CPE610 problem, limits speed at 30Mbps
2021-09-24 18:31:04
Model: CPE610  
Hardware Version: V2
Firmware Version: 2.2.4 Build 20200803 Rel. 49476

Hello community, I am having problems with the internet speed that the CPE610 emits in AP mode.
I have a 300Mbps internet connection but the CPE is limited to 30Mbps .. 

I tested the LAN cable from the modem directly connected to the notebook and it works at 300Mbps (speedtest.net).. with the same cable connect the CPE610 and I connect directly from the notebook next to the CPE via wifi and I receive 30Mbps (speedtest.net)..
Channel: 144
distance 0

 

Any ideas?

  1      
  1      
#1
Options
3 Reply
Re:CPE610 problem, limits speed at 30Mbps
2021-09-27 06:37:09

@Adrim 

What is the link speed when your notebook is connected to CPE's Wi-Fi ?

According to my understanding, you can check the specification sheet of CPE610 from their official website. CPE610 uses a 100M port, which means that the device you connect to the CPE cannot get a network exceeding 100M, and the actual download speed is usually about 50% of the wireless link speed (you can Google the difference between the link speed and the actual download speed), so you will get a lower download speed.

  1  
  1  
#2
Options
Re:CPE610 problem, limits speed at 30Mbps
2021-09-29 21:49:26

@Yannie thanks for the reply, i've not check the link speed between notebook and cpe but i've tested link between 2 cpe610 

i'll check later with the notebook.. 

 

  0  
  0  
#3
Options
Re:CPE610 problem, limits speed at 30Mbps
2021-09-30 16:28:47 - last edited 2021-09-30 16:36:42

@Yannie I've check the speed link with the notebook:

 

why its only 72mbps ??  i know that i will not get morhe than 100Mbps 'cause the eth port is 10/100 .. but speed link with 5.8Ghz its only 72mbps.. i think this is the problem..

  0  
  0  
#4
Options

Information

Helpful: 1

Views: 805

Replies: 3