IPV6 on TP-LINK TL-ER605
IPV6 on TP-Link ER605 does not work. It is unable to authenticate to the service provider. I used two providers that provide the service via PPPoE and it was not possible to authenticate. Is it not possible to configure the IPV6 service for LAN on the internal network as well? Is there any solution available for this error?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Who's the ISP? You can share this info with us and let the support team investigate. Maybe other people have the same issue.
See the firmware is the latest. Release note says IPv6 supported. Confirm the PPPoE info are correct? Do you contact your ISP and confirm any other configs should be made on the router to support the authentication?
Any luck with the controller mode? There are more options for IPV6 settings on Controller mode.
I checked the LAN on Controller mode, you could set up IPv6 DHCP.
- Copy Link
- Report Inappropriate Content
@luizfernandowb CenturyLink uses 6rd for IPv6 in their network. Looks like TL-ER605 doesn't support that protocol. I'm also a CenturyLink customer and would be happy if TP-Link add that to one of next firmware versions. I think it's not too hard because it already support 6to4 and 6rd is very similar.
TP-Link support - is there any plans to add 6rd support to TL-ER605?
- Copy Link
- Report Inappropriate Content
Could try this, I got it working with PPPoE
https://www.zylmenianetworks.co.uk/HomeNet/uncategorized/zen-internet-ipv6-tp-link-r605/
- Copy Link
- Report Inappropriate Content
@luizfernandowb Tried that. Didn't work. I don't think CenturyLink support IPv6 with this configuration. As I said previously - they work with 6rd.
- Copy Link
- Report Inappropriate Content
Did you ever get ipv6 to work? I have, like you, tried 100 times different ways to get ipv6 through this er605 with no luck. Although plug 2 different wifi routers into cable modem and both work immediately
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 7927
Replies: 7
Voters 0
No one has voted for it yet.