Solution to DHCP Issues of Routers (ER605 | ER7206 | ER8411 | ER7212PC) [Closed on May 22nd 2023]

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1567...

Solution to DHCP Issues of Routers (ER605 | ER7206 | ER8411 | ER7212PC) [Closed on May 22nd 2023]

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
276 Reply
Re: ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware [Updated on Nov 2nd 2022]
2022-11-06 15:23:57

@Fae with this updated beta for the ER605 v1 (1.2.2 20221015), I am still seeing some wireless devices show in the client list as wired, rather than connected through an AP. Can you please advise? Thank you!

  2  
  2  
#52
Options
Re: ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware [Updated on Nov 2nd 2022]
2022-11-07 09:37:25

I can confirm that for ER605 V2, the beta firmware v2.0.2 does not support mDNS. When trying to enable mDNS I get the error: "The gateway does not support mDNS."

Current Setup: 1x ER605 v2.0, 1x TL-SG3428X v1.0, 2x TL-SG3210 v3.0, 1x TL-SG2210MP v1.0, 2x EAP670(EU) v1.0
  0  
  0  
#53
Options
Re: ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware [Updated on Nov 2nd 2022]
2022-11-08 07:46:18

Dear @Family_AM ,

 

Thank you for posting this issue in this thread.

 

To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue.

The ticket ID is TKID221110853, please check your email box and ensure the support email is well received. Thanks!

Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.

 

Many thanks for your great cooperation and patience!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#54
Options
Re: ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware [Updated on Nov 2nd 2022]
2022-11-08 08:02:47

Dear ioannis,

 

Sorry to hear that you still have this issue, to better help you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID221110867, please check your email box and ensure the support email is well received. Thanks!

Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.

 

Best Regards!

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#56
Options
Re: ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware [Updated on Nov 2nd 2022]
2022-11-08 14:05:23

I upgrade my ER605 v1 to the beta firmware released on Nov 2nd. Findings:

 

1) The router was stable and DHCP server was working as normal. CPU on the Controller server was also normal;

2) After rebooting the server and router:
2.1) DHCP server was not working. I had to manually set IP and re-enable my DHCP server on the server (Pi-Hole)

2.2) CPU load was high on the Controller server. I usually get loads within 0.08, and it was a solid 2.1;

 

3) After reverting back to 1.2.1 with DHCP server disabled, the CPU load was restored to normal.

 

Thanks

Luciano

  0  
  0  
#57
Options
Re: ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware [Updated on Nov 2nd 2022]
2022-11-09 17:53:27

  @Fae I'm able to enable mDNS on the Nov firmware for ER7206 v1.0 and I don't get an error. Does that mean it has been implemented?

  0  
  0  
#58
Options
Re: ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware [Updated on Nov 2nd 2022]
2022-11-09 23:28:36

  @Fae 

 

Stealth port fix isnt working on ER605 v2 with latest beta

  0  
  0  
#59
Options
Re: ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware [Updated on Nov 2nd 2022]
2022-11-10 12:08:41

  @Fae 

ER7206 v1 new firmware showed up as available 1.2.3. Installed as it is to fix a whole list of things including the dhcp bug in this thread.  Seems to have broken the VPN stats / logging. VPN Stats are now completely blank although there are three connectd site to sites.  DHCP bug is fixed.  If further info is required let me know what I need to provide.

Cheers!

  0  
  0  
#60
Options
Re: ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware [Updated on Nov 2nd 2022]
2022-11-10 12:13:55

  @BrnM 

 

BrnM wrote

  @Fae 

ER7206 v1 new firmware showed up as available 1.2.3. Installed as it is to fix a whole list of things including the dhcp bug in this thread.  Seems to have broken the VPN stats / logging. VPN Stats are now completely blank although there are three connectd site to sites.  DHCP bug is fixed.  If further info is required let me know what I need to provide.

Cheers!

Do you know if there is anything available for the ER605 also?

Current Setup: 1x ER605 v2.0, 1x TL-SG3428X v1.0, 2x TL-SG3210 v3.0, 1x TL-SG2210MP v1.0, 2x EAP670(EU) v1.0
  0  
  0  
#61
Options
Re: ER605 ER7206 v1 - DHCP Server May Fail With 1.2.0 and 1.2.1 Firmware [Updated on Nov 2nd 2022]
2022-11-10 12:35:56

  @Adandu 

 

where are you seeing v1.2.3 ?

  0  
  0  
#62
Options