Hi!

ER605 V2 here, firmware 2.2.2.
Trying to config SITE-TO-SITE (permanent tunnel), but no luck.
How can I add multiple subnets in Peer "Allowed IP" parameter? (On each side).
I can not ping between subnets, but routers can between them.

 

--------------------------------------------------------

 

# Subnet A

10.10.2.0/24

# Router A

[Wireguard]

Local IP Address = 10.10.10.2

Listen Port = 51820

[Peers]

Public Key = PubKey Router B

Endpoint = Router B IP

Endpoint Port = 51820

Allowed IP = 10.10.3.0/24      <<<<<<<<  THIS IS WHERE I CAN NOT ADD ANOTHER SUBNET

Persistent Keepalive = 16

 

--------------------------------------------------------

 

# Subnet B

10.10.3.0/24

# Router B

[Wireguard]

Local IP Address = 10.10.10.3

Listen Port = 51820

[Peers]

Public Key = PubKey Router A

Endpoint = [empty]

Endpoint Port = [empty]

Allowed IP = 10.10.2.0/24      <<<<<<<<  THIS IS WHERE I CAN NOT ADD ANOTHER SUBNET

Persistent Keepalive = 16

 

--------------------------------------------------------

 

From any device from Subnet A I can ping only to Router B IP.

(ping 10.10.3.1  >> OK)
(ping 10.10.3.101 >> Request timed out!)

 

From any device from Subnet B I can ping only to Router A IP.

(ping 10.10.2.1  >> OK)
(ping 10.10.2.101 >> Request timed out!)

 

 

Any help will be appreciated!
Thanks!