Backup settings of devices controlled by the Omada controller

Backup settings of devices controlled by the Omada controller

Backup settings of devices controlled by the Omada controller
Backup settings of devices controlled by the Omada controller
2024-08-06 13:53:08 - last edited 2024-08-15 08:37:04
Model: OC300   TL-SG3452XP   ER8411  
Hardware Version:
Firmware Version: 5.14.26.23

Привет!
Как сохранить настройки устройства (маршрутизатора, коммутатора), управляемого контроллером Omada?
Например, если коммутатор вышел из строя, я хочу заменить его на другой, как восстановить настройки на новом устройстве?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Backup settings of devices controlled by the Omada controller-Solution
2024-08-07 07:28:36 - last edited 2024-08-15 08:37:04

Hi  @Robotron 

 

There is no need to do any extra settings. As long as the replacement switch is the same as the old one, and make sure the port connection is totally same as before, the controller will apply the settings to the switch automatically.

Just in case, you can also backup configuration settings for the controller. Config page as below:

 

Recommended Solution
  0  
  0  
#3
Options
1 Reply
Re:Backup settings of devices controlled by the Omada controller-Solution
2024-08-07 07:28:36 - last edited 2024-08-15 08:37:04

Hi  @Robotron 

 

There is no need to do any extra settings. As long as the replacement switch is the same as the old one, and make sure the port connection is totally same as before, the controller will apply the settings to the switch automatically.

Just in case, you can also backup configuration settings for the controller. Config page as below:

 

Recommended Solution
  0  
  0  
#3
Options