[Beta]Connect Tp-Link CPE210 to Mikrotik
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[Beta]Connect Tp-Link CPE210 to Mikrotik
Region : Argentina
Model : CPE210
Hardware Version : V1
Firmware Version : 1.2.1
ISP :
Hello,
We have been using tp-link cpe's for a long time. Most recently the 7210 and they work good. But now our supplier is selling us the new cpe210.
We have trouble connecting it to our network. Our AP's are mikrotik. The cpe210 connects, but then no data passes. We tried as both client mode or ap client router mode (wisp client).
We use the 7210 in ap client router mode and expected to use it in the same manner. The wireless part in the mikrotik configuration is pretty basic, nothing fancy there and all other kind of cpe connects fine.
What I noticed different is that when cpe210 connects in the mikrotik log i see a message : wants bridge. Which is kinda strange for a wisp client. Maybe that is the problem but I don't see any option to disable it.
Model : CPE210
Hardware Version : V1
Firmware Version : 1.2.1
ISP :
Hello,
We have been using tp-link cpe's for a long time. Most recently the 7210 and they work good. But now our supplier is selling us the new cpe210.
We have trouble connecting it to our network. Our AP's are mikrotik. The cpe210 connects, but then no data passes. We tried as both client mode or ap client router mode (wisp client).
We use the 7210 in ap client router mode and expected to use it in the same manner. The wireless part in the mikrotik configuration is pretty basic, nothing fancy there and all other kind of cpe connects fine.
What I noticed different is that when cpe210 connects in the mikrotik log i see a message : wants bridge. Which is kinda strange for a wisp client. Maybe that is the problem but I don't see any option to disable it.
Re:[Beta]Connect Tp-Link CPE210 to Mikrotik
Post Mikrotik model.
I don't use 1.21 FW, if something has changed on the Client side about MaxStream make sure is disable, and if there is a similar protocol in Tik make sure is disable, if so, on the past did not affected the SISO line (7210) but as 210 being MIMO it might
Read Notice for other Modes:
imag
I don't use 1.21 FW, if something has changed on the Client side about MaxStream make sure is disable, and if there is a similar protocol in Tik make sure is disable, if so, on the past did not affected the SISO line (7210) but as 210 being MIMO it might
Read Notice for other Modes:
imag