Early Access EAP772v2 | EAP723v1 | EAP772-Outdoor V1 1.3.1 Pre-release Firmware (Update on 15th Jul, 2025)
This Article Applies To:
EAP772 V2, Fully Adapted to Omada SDN Controller v5.15 or above;
EAP772-outdoor V1, Fully Adapted to Omada SDN Controller v5.15 or above;
EAP723 V1, Fully Adapted to Omada SDN Controller v5.15 or above;
Release Notes:
New Feature/ Enhancement:
1. Added support for Radius logout and CHAP encryption in Standalone mode.
2. Added support for portal landing page selection in Standalone mode.
3. Added support for wired client traffic reporting of accelerated models.
4. Added support for modifying the Inform URL in SSH.
5. Modified the default list of NTP Servers.
6. Optimized the AP portal function.
7. Optimized the RA message processing of the IPv6 wireless air interface.
8. Optimized the configuration logic and improved the configuration efficiency.
9. Upgraded the OpenSSL library version to 1.1.1n.
10. Added the EAP power information to LLDP messages.
11. Updated the Uboot function.
12. Resolved the issue of high air interface occupancy rate in large-scale deployment scenarios.
13. Resolved the issue that modifying the PPSK without radius profile affected other SSIDs.
14. Support AFC for EAP 772V2(US) & EAP772-Outdoor(CA).
15. Supports custom Channel Range.
16. Supports New VI: Including New Logo, New Color Specifications and New Typography in Standalone Website.
For EAP772-Outdoor V1, the following new features have been added:
1. Supports displaying Configuration Result.
2. Supports cluster deployment in Controller mode (CBC does not support).
3. Supports Radius Proxy.
4. Supports OWE.
5. Supports custom Channel Range.
6. Supports upgrading firmware through cloud in Standalone mode.
7. Supports Portal Logout.
8. Supports disabling HTTP protocol in Standalone mode.
9. Supports DHCP Option43.
10. Supports multiple Radius Servers for MAC-Based Authentication.
11. Supports configuring NAS ID with WPA-Enterprise encryption.
12. Supports DNS Queries.
13. Supports configuring Rate Limit with Portal in Controller mode.
14. Supports configuring the Device Name in Controller mode, which can be carried in LLDP/SNMP/DHCP interaction.
15. Supports viewing status information and making some simple configuration through Standalone management page when the EAP is managed by the Controller and disconnected with Controller currently.
16. Supports displaying the maximum associated clients based on the EAP model in Controller mode.
17. Supports displaying the radio bandwidth of the EAP in Controller mode.
18. Supports configuring wireless mode in Controller mode.
19. Supports statistics of Multicast/Broadcast packets.
20. Supports 1024 PPSK entries.
21. Supports 802.11 a/n mixed in 5G.
22. Supports Non-stick Roaming function.
23. Supports authentication type of EKMS and Generic Radius with Unbound MAC for PPSK with Radius.
24. Supports Multicast Filtering with IPv6 address.
25. Supports reporting default OFDMA status.
26. Supports MAC Filter with 2000 entries per MAC Group profile.
27. Support DNS adoption.
28. Supports Multicast/Broadcast Rate Limit.
29. Enhances security protection.
30. Improves stability.
31. Improves support for more SSH commands.
32. Optimizes Automatic Power Optimization function.
33. Optimizes the configuration of Beacon Interval.
34. Optimizes roaming function.
35. Optimizes logs displayed in Controller.
Beta Firmware Download
Attention
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
EAP772 v2.0_1.3.1_20250715-rel43450 (Pre-release Version)
EAP723 v1.0_1.3.1_20250715-rel43450 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.1_20250715-rel43450 (Pre-release Version)
EAP772 v2.0_1.3.1_20250620-rel36729 (Pre-release Version)
EAP723 v1.0_1.3.1_20250620-rel36729 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.1-20250620_rel36729 (Pre-release Version)
EAP772 v2.0_1.3.0 (Pre-release Version)
EAP723 v1.0_1.3.0 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.0 (Pre-release Version)
Notes:
(1) Your device’s configuration won’t be lost after upgrading.
(2) The above firmware is fully adapted to Omada SDN Controller v5.15 and above
Update Log
5th Sep, 2025
Major Updates/Enhancements:
17. Fixed the registration issue for new AFC devices
18. Optimized the timeout duration for AFC queries
EAP772 v2.0_1.3.1_20250904-rel58599 (Pre-release Version)
EAP723 v1.0_1.3.1_20250904-rel58599 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.1_20250904-rel58599 (Pre-release Version)
15th Jul, 2025
Provide the following update:
EAP772 v2.0_1.3.1_20250715-rel43450 (Pre-release Version)
EAP723 v1.0_1.3.1_20250715-rel43450 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.1_20250715-rel43450 (Pre-release Version)
23th Jun, 2025
Major Updates/Enhancements:
1. Fixed the AFC issue.
EAP772 v2.0_1.3.1_20250620_rel36729 (Pre-release Version)
EAP723 v1.0_1.3.1_20250620_rel36729 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.1_20250620_rel36729 (Pre-release Version
4th Jun, 2025
Provide the pre-release link:
EAP772 v2.0_1.3.0 (Pre-release Version)
EAP723 v1.0_1.3.0 (Pre-release Version)
EAP772-Outdoor v1.0_1.3.0 (Pre-release Version)
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
EAP772v2 | EAP723v1 | EAP772-Outdoor V1 1.3.1 Pre-release Firmware (released on 5th Sep, 2025)
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
After I day of test AFC does stay active but it appears fixing that has caused other issues. Now I have frequent disconnects and reconnects. I can be using my phone, laptop or tv and the wifi will randomly drop and then reconnect after about 5 seconds. For example I was streaming a movie and every minute it would buffer for 5 seconds while it was reconnecting. At first I thought it was the TV but noticed in on all devices.
I will say this is getting really frustrated. I have dropped over $2000 on my omada network setup and it seems like everytime there is an update TP-Link fixes one thing but creates multiple other issues.
- Copy Link
- Report Inappropriate Content
Hi @bramezan
Sorry to hear about the unpleasant experience. We will try to locate the reason ASAP.
A new email has been sent to you, please kindly check and reply with the requested information. Thanks.
- Copy Link
- Report Inappropriate Content
The issue I was having has seemed to work itself out. I have however noticed that mesh doesn't seem to work as well. Prior to the update I had the EAP772 running in mesh mode with a signal of -58 dbm and rates of 2.31gbps both up and down. After the update and enabling AFC the signal has dropped to -81 dbm and rates of 1.15gbps and sometimes as low as 550mbps. I thought enabling AFC would allow the unit to increase the TX power of the 6ghz band?
- Copy Link
- Report Inappropriate Content
Hi @bramezan
Automatic Frequency Control (AFC) is primarily used to stabilize the frequency of communication systems, thereby reducing signal drift or interference. However, it does not directly enhance the TX power of 6G, as the core function of AFC is frequency correction rather than power amplification.
Regarding the situation of weakened mesh signal and reduced link speed, have you recently adjusted the positions of the two EAPs? Are there any new obstacles or signal interference? Or have you recently modified the channel, channel width, or other settings of the uplink EAP? All of these will affect the mesh signal strength.
If disabling AFC, will there be any improvement?
bramezan wrote
The issue I was having has seemed to work itself out. I have however noticed that mesh doesn't seem to work as well. Prior to the update I had the EAP772 running in mesh mode with a signal of -58 dbm and rates of 2.31gbps both up and down. After the update and enabling AFC the signal has dropped to -81 dbm and rates of 1.15gbps and sometimes as low as 550mbps. I thought enabling AFC would allow the unit to increase the TX power of the 6ghz band?
- Copy Link
- Report Inappropriate Content
I have seen many times especially with the deco lineup where with AFC support the 6ghz band has the same range as the 5ghz band. Is that not the same with the omada lineup?
Nothing has moved with my Mesh setup. With AFC enabled my signal is -81dbm with a link rate of 1.15gbps TX and 648mbps RX. With it disabled the signal is -70dbm with a link rate of 2.31gbps TX and 1.73gbps RX.
Does the omada lineup not use MLO mesh like the Deco lineup?
- Copy Link
- Report Inappropriate Content
Hi @bramezan
Thanks for the feedback.
We would like to test this at our local lab. To ensure that our test conditions are totally the same as yours, please send us the following information via the ticket TKID250632028:
1. The configuration file of controller (Global View > Maintenance > Backup >export, NOT export for support);
2. The topology of your network, please also include the Deco model number and how do they connected to the EAP unit.
- Copy Link
- Report Inappropriate Content
Do you have a plan to add AFC to EAP772v1 ?
Do you have a plan to realese new firmware with new feature to EAP772v1 ?
- Copy Link
- Report Inappropriate Content
@Vincent-TP would be great if TP-Link could address this issue https://community.tp-link.com/en/home/forum/topic/755870
This makes MLO useless on EAP772 (and probably also EAP773 if they share the same firmware and/or hardware).
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4798
Replies: 44
Voters 0
No one has voted for it yet.