First I have the TL-WA801N - NOT the TL-WA801ND which is the only option on the dropdown.


I have 900 Mbps plus internet connection into my office - the cable from the base router is connected to a TP Link TL-SG105E switch to split the signal between two computers and my wireless access point.
The computers both consistently report speeds of over 900Mbps - up to 980/990Mbps commonly on their wired connections from the TL-SG105E switch.

The wireless access point only puts out around 20-30 Mbps wireless despite being lan connected to the same hub.
I have tried multiple cables - swapping the cable that connects my TL-WA801N with the one that connects to my computers still gives them the same speeds...

The WAP is connected as a simple access point.
I have tried disabling the DHCP server.
I have tried setting it to both Mode 11BGN Mixed and !!BG Mixed

In other words there is something in the configuration that is throttling the wireless output massively - it should be getting somewhere near to 300 Mbps not 20 to 30Mbps...

Any help or advice would be most welcome thank you,
Bill