4
Votes

Feature Request: IGMP Querier Configuration via Omada Controller

 
4
Votes

Feature Request: IGMP Querier Configuration via Omada Controller

Feature Request: IGMP Querier Configuration via Omada Controller
Feature Request: IGMP Querier Configuration via Omada Controller
2025-08-06 08:56:42

In setups where the stream server and STBs are in the same subnet, one of the devices in the multicast environment must act as an IGMP querier—ideally the device closest to the multicast source.
Currently, configuring a querier requires using CLI templates. Please add native support in the Omada Controller GUI for the following features:

 

Enable IGMP Querier on Specific VLANs
Example CLI:
ip igmp snooping vlan-config 30 querier


Set Custom Source IP for Querier Messages
Currently, the default source IP is 192.168.0.1, which is not ideal in multi-VLAN setups. The source IP should be configurable to match the VLAN where multicast traffic is expected (e.g., the CCTV VLAN).
Example CLI:
ip igmp snooping vlan-config 30 querier general-query source-ip 10.10.30.1

 

Ability to Configure Interface VLANs from GUI
Since assigning a source IP requires the VLAN interface to exist, allow us to define Interface VLANs directly from the Omada Controller, without relying on CLI templates.

#1
Options
4 Reply
Re:Feature Request: IGMP Querier Configuration via Omada Controller
2025-08-07 03:42:49

Hi  @mgulan 

 

Hello, thank you for posting on the TP-Link community. We appreciate all your feedback and feature requests here. While we don't have any specific details to share regarding whether the feature can be implemented across all controllers or when it might be, I'll ensure that I log this feature request and pass it along to the team.
Feel free to let us know of any other feature requests you may have; we’d be happy to send them up for you.

 

#2
Options
RE:Feature Request: IGMP Querier Configuration via Omada Controller
Wednesday
working with CLI templates is to confusing
#3
Options
Re:Feature Request: IGMP Querier Configuration via Omada Controller
Wednesday

  @Vincent-TP 

 

How comes this requested feature is described in this official article: 

How to configure IGMP Snooping on Omada switches for hotel IPTV scenario | TP-Link

If you scroll down to the bottom of the article you will see the interface (which is currently missing in my controller)

 

I don't seem to have this option:


 

Can someone elaborate on this?

 

Thanks

#4
Options
Re:Feature Request: IGMP Querier Configuration via Omada Controller
Thursday

Hi  @Lospatjos 

 

The addition or modification of a feature requires time and due process. I believe this version hasn't incorporated such changes yet.

I'll raise this feedback again. Thank you for your attention and support.

#5
Options