@Robbp12 topology

Attic Switch
SG2210P v5.20
5.20.17
25day(s) 54m 4s

Basement Fiber Switch A
SX3008F v1.20
1.20.14
7day(s) 14h 30m 4s

Basement Fiber Switch B
SX3008F v1.20
1.20.14
4day(s) 16h 59m 44s

Basement Switch
SG3428 v2.30
2.30.15
4day(s) 17h 7m 32s

Downstairs AP
EAP610(US) v2.0
1.4.4
12day(s) 22h 39m 25s

Front door cam AP
EAP225-Outdoor(US) v3.0
5.1.11
110day(s) 17h 53m 37s

Garage AP
EAP225-Outdoor(US) v3.0
5.1.11
8day(s) 20h 20m 7s

Garage Switch
SG2210P v5.20
5.20.17
8day(s) 20h 20m 10s

Music Room Switch
SG2210P v5.20
5.20.17
25day(s) 53m 54s

Lower Hallway AP
EAP610(US) v3.0
1.6.0
2day(s) 16h 11m 56s

Office Switch
SG2210P v5.20
5.20.17
25day(s) 52m 45s

Upstairs AP
EAP610(US) v2.0
1.4.4
25day(s) 52m 2s

Upstairs2 AP
EAP610(US) v2.0
1.4.4
25day(s) 52m

Wall AP
EAP615-Wall(US) v1.0
1.5.4
25day(s) 52m 9s

Yard Cam AP
EAP225-Outdoor(US) v3.0
5.1.11
111day(s) 13h 20s

basement AP
EAP225-Outdoor(US) v3.0
5.1.11
12day(s) 22h 39m 43s

spare switch
TL-SG2210P v3.20
3.20.14
12day(s) 22h 40m 47s

Omada software controller 6.1.0.19 running on windows server 2022 standard. 8gb ram 120gb HDD

  @Hank21 

Actually, I'm not so sure anymore I have same issue as Robbp12. After upgrading to beta firmware 1.20.14, the sx3008-f froze within 48 hours. I powered it off then on and planned to wait until the next freeze to reset the configuration. But it's been running 6 days without any issue. In the meantime a newer firmware came out, 1.20.16 with same release notes as 1.20.14, so we don't really know the enhancements or fixes it brings. Since I'm away from home for a few days, I'll wait until Wednesday to upgrade to 1.20.16.   My question to you. How come this firmware is officially released for only a few switches, as described in "Armor Up Your Network: A Deep Dive into Omada Switch’s Intelligent CPP Technology". For example 1.20.16 is available for the sx3016f, but not the sx3008f (still at 1.20.12 on official download page) ?

  @Hank21 I updated and haven't had a problem. so far so good