Getting Started

Getting Started

Getting Started
Getting Started
2026-08-19 06:42:39 - last edited 2026-08-25 08:26:09
Model: ER7212PC  
Hardware Version: V1
Firmware Version: 1.3.2

I currently have an ER7212PC v1.0 device, which at the moment serves as my gateway to the outside world. It functions both as a router and a switch. However, due to the growing number of connections within my home LAN, I would like to organize the network infrastructure more efficiently.

To achieve this, I need to select two or three switches, with a maximum of six ports each, which can also be managed through the Omada Controller.

I am considering locally expanding the number of ports near the controller by adding an SG2206MP switch, along with up to two ES205GP switches. In addition, I currently have one EAP235-Wall (EU) access point, powered via PoE from the controller, and I plan to add another EAP615-Wall access point in the future.

Does this design approach make sense, and is my line of thinking correct?

  0      
0
#1
Options
1 Accepted Solution
Re:Getting Started-Solution
2026-08-25 08:26:06 - last edited 2026-08-25 08:26:09

Hi  @vierd 

 

Thanks for posting here. There is one thing you need to keep in mind:

ER7212PC V1 can only manage 2 Omada switches at most.

 

In other words, for the switch part, the ER7212PC V1 can't meet your needs. Either you keep the number of switches to two, or you use a separate controller to manage the switches. However, a separate controller cannot manage the ER7212PC.

If you don’t plan to replace the ER7212PC gateway, I suggest buying two switches with more ports.

Recommended Solution
  2  
2
#2
Options
1 Reply
Re:Getting Started-Solution
2026-08-25 08:26:06 - last edited 2026-08-25 08:26:09

Hi  @vierd 

 

Thanks for posting here. There is one thing you need to keep in mind:

ER7212PC V1 can only manage 2 Omada switches at most.

 

In other words, for the switch part, the ER7212PC V1 can't meet your needs. Either you keep the number of switches to two, or you use a separate controller to manage the switches. However, a separate controller cannot manage the ER7212PC.

If you don’t plan to replace the ER7212PC gateway, I suggest buying two switches with more ports.

Recommended Solution
  2  
2
#2
Options