[Setup Videos] The management of Omada EAPs

Released On: 2018-12-29 02:18:18Last update time: 2022-09-16 10:04:56

This guide applies to: EAP110 / EAP115 / EAP225 / EAP245 / EAP320 / EAP330 / EAP115-Wall / EAP225-Wall / EAP110-Outdoor / EAP225-Outdoor 
As a stepping stone helping you get started in Omada EAPs, this article introduces how to choose an optimal management method in your situation, and the setup steps of each method. 

Part 1: How to Select the Best Management Method for Your Needs
There are several essential considerations when looking for the optimal methods, from your network size to the management tools. This part helps you select the best management methods for your needs.

For the detailed steps of each management method, refer to the Part 2: How to Manage EAPs with Different Management Methods in this article.

Choose the Management Mode According to Your Wireless Network Size

Omada EAPs support two configuration modes: Controller Mode and Standalone Mode. The following comparison chart clarifies the notable features of the two modes.


Controller Mode and Standalone Mode

 ● Controller Mode

Controller Mode is the preferred method for centrally managing mass EAPs in a large-scale wireless network. Controller Mode provides an all-in-one and super convenient solution for EAPs configurations and maintenance. With Cloud Access enabled, you can log in to the controller at any place. And you can view the AP devices, clients, statistics, insights, logs. Some advanced functions like customizing the facebook portal and monitoring the system topology on a map are only supported in Controller Mode, which are frequently used in a large-scale network. 

In Controller Mode, all EAPs can be centrally configured and monitored via a software controller (Omada Software Controller) or a hardware controller (OC200). For how to determine the controller type, see here to get help.

● Standalone Mode

Standalone Mode is designed for singly managing a small number of EAPs in a relatively small-sized wireless network. This mode is recommended for users who want to control their APs right away without taking the time to configure a controller, which can simplify the process.
In Standalone Mode, each EAP can be configured by the Omada app or the management web page. For detailed information about the configuration steps, see here to get help.

 

Choose Software Controller or OC200 According to Your Budget and Needs

Tailored to your needs and budget, choose an Omada Software Controller or an Omada Hardware Controller (OC200) to configure your EAPs in Controller Mode. The following comparison chart clarifies the notable features of Software Controller and OC200.

software controller or OC200

● Software Controller 

Omada Software Controller is a free management software for TP-Link EAP devices. With this software hosted on the computer of your network, you can configure EAPs in batches and conduct real-time monitoring of EAPs locally or remotely through Omada Cloud Access. 
Omada Software Controller is required to be running for the devices to use advanced functions like Voucher portal. So the downside is additional considerations and expense for the computer’s continuous work. 

● Hardware Controller (OC200)

The Omada Hardware Controller (OC200) is the management device which is pre-installed with the Omada Software Controller 3.0.2 or above. You just need to pay for the OC200, then the built-in Omada Controller software is free to use, no license fee or extra cost required. With the small size as a mobile phone which does not take much space, OC200 is easy to deploy and install.

Choose Omada App or a Web Browser According to Your Management Device
The suited management interface depends on what kind of management device you use. 

● Using a Web Browser
On a PC, you can use a web browser. Both Controller Mode and Standalone Mode support login with a web browser. In Controller Mode, the Mozilla Firefox, Google Chrome, Opera and Microsoft Internet are supported. We recommend that you use the latest version of browser to manage Omada Controller.
● Using Omada App
On a mobile phone, you can use the Omada app. There are versions for iOS and Android, available for free on the App Store and Google Play. With Omada app, You can monitor your network or make quick configuration adjustments when you are on the go.

Part 2: How to Manage EAPs with Different Management Methods
Manage Your EAP via Omada App in Standalone Mode
Follow the steps to set up your EAP via Omada app in Standalone Mode.
1. Launch the Apple App Store (iOS) or Google Play store (Android) and search “TP-Link Omada” or simply scan the QR code to download and install the app.

2. Connect your mobile device to the EAP by using the SSID of the EAP (the default SSID is printed on the label at the bottom of the EAP in the format of TP-Link 2.4GHz/5GHz_XXXXXX).
3. Launch the Omada app, tap Standalone APs and wait for the EAP device to be discovered. Tap on the EAP device appearing on the page. Set a new username and password for your login account of the EAP.

Manage Your EAP via a Web Browser in Standalone Mode
Follow the steps to set up your EAPs via a web browser.
1. Connect wirelessly by using the SSID of the EAP (the default SSID is printed on the label at the bottom of the EAP in the format of TP-Link 2.4GHz/5GHz_XXXXXX).
2. Launch a web browser and enter http://tplinkeap.net in the address bar. Use admin for both Username and Password to log in.
3. Set up a new Username and Password for secure management purpose. Modify the wireless parameters and reconnect your wireless devices to the new wireless network.

You can watch the following video to learn how to configure the EAP single via a  web browser.

Manage Your EAP Using Software Controller in Controller Mode
Follow the steps to set up your EAPs using Software Controller.
1. On the PC with Windows OS or Linux OS, download the Omada Controller installation file from TP-Link official website.
2. Run the file and follow the wizard to install the Omada Controller.
3. Launch the Omada Controller and follow the step-by-step instructions to complete the Quick Setup. After the wizard is finished, a login screen will appear.
4. Enter the username and password you created and click Log in. Then you can further configure the Omada Controller.

Manage Your EAP Using OC200 in Controller Mode
Follow the steps to set up your EAPs using OC200.
1. Deploy OC200 on your network and power it on. Make sure that your management device and OC200 are on the same subnet.
2. Check the DHCP server (typically a router) for OC200’s IP address.
3. Launch a web browser and type OC200’s IP address in the address bar, then press Enter (Windows) or Return (Mac).
4. Launch the OC200 and follow the step-by-step instructions to complete the configuration wizard.

This video will demonstrate how to set up the OC200 via a web browser.

Manage Your EAP with Omada Cloud Access in Controller Mode
1. Enable Cloud Access on the controller software or OC200.
2. Make sure that your management device and the controller (the OC200 device or the host installed with Omada Controller software) can access the internet.
3. Launch a web browser and type https://omada.tplinkcloud.com in the address bar, then press Enter (Windows) or Return (Mac). Enter your TP-Link ID and password to log in.
4. The configurations between the Software Controller and OC200 is are slightly different.
    For Software Controller, a list of Omada Software Controller that has been bound with your TP-Link ID will appear. Click Launch to visit the web management interface of your controller software.
    For OC200, enter your TP-Link ID and password to log in. Then click Add Cloud Controller and follow the instructions to add your OC200. Click Launch to visit the web management interface of OC200.

To understand how to use Omada Cloud Access, you can refer to the following video.

Manage Your EAP with Omada App in Controller Mode
First, you need to download Omada app on your mobile device from the the Apple App Store (iOS) or Google Play store (Android). Search “TP-Link Omada” or simply scan the QR code to download and install the app.
omada app

● Local Access

For Software Controller, connect your mobile to the EAP by using the default SSID printed on the label of the EAP. Launch the app and go to Local Access, tap + button on the upper-right corner to add Omada controller.

For OC200, make sure that your management device and OC200 are on the same subnet. Launch the app and go to Local Access, tap + button on the upper-right corner to add OC200.

Remote Access

For Software Controller, make sure that Cloud Access is enabled on your controller and your controller has been bound with a TP-Link ID. Launch the app and log in with your TP-Link ID. Then go to Cloud Access. A list of Omada Controller that has been bound with your TP-Link ID will appear. Then you can further configure the controller.

For OC200, make sure that your management device and OC200 can access the internet. Launch the app and log in with your TP-Link ID. Tap the + button on the upper-right corner to add OC200. Select OC200 and follow the step-by-step instructions to complete the configuration wizard.

This video will demonstrate how to set up the OC200 via your mobile phone.

Appendix: A Quick Overview of EAP Management Method
The following picture gives a quick overall information of the methods for managing Omada EAPs. You can scan the related QR code to open the corresponding configuration videos. More videos about managing EAPs via Omada App and OC200 will be published in the near future, which will introduce all the management methods. You are welcome to leave your suggestions for new videos in the post to improve our work.
For more detailed introductions of the EAP and controller, you can visit https://www.tp-link.com/support to download the configuration guide in the download center. 

A quick overview of EAP Management Method

 

6
Comment

I was looking for information about the products that this page offers and I am satisfied with what I found.

I am using tplink modems from login time for my inernet connection and they are one the best providers  

Omada app is used for configuring and managing your Omada EAPs. You can change settings, monitor the network status and manage clients, all from the convenience of a smart phone or tablet. 

TP-Link are fantastic, I have a bit of an IT background, so interested to look into this a bit more

 

Sam

Found a lot of useful information, glad to join your community 192.168.1.1

​​​​​​Thank you for sharing this amazing related to The management of EAPs 

https://www.paramedicalinfo.com/

​​​​​​Thank you for sharing this amazing related to The management of EAPs 

https://www.paramedicalinfo.com/

Does cloud based software or mobile app provides seamless roaming? I wants to connect 2 eap 225 as a seamless roaming so do I have to purchase oc200 ? 

   Buenas noches ,estoy teniendo problemas con la cuestion de logarme en la nube ,entro al controlador cloud y si me logro logear pero al estar ya en el sitio tods los EAP que tengo en el sitio me aparecen siempre desconectados .,aunque los equipos estan funcionando  trabajando correctamente

   Espero puedan ayudarme a saber que pasos estoy omitiendo en mi configuracion cloud para poder ver y gestionar mis equipos  saludos gracias

We are the best mywifiext local service provider who offers benefits to our customers & users. We have many years of experienced professionals. If you have any queries of an issue with your mywifiext.net Device then contact our technical experts and resolve your all technical issues. 192.168.1.250  https://mywifiiextnet.com

12
upload
    upload