Low Wi-Fi speed when connecting to 5GHz of EAP devices

Recently we receive a feedback from a customer that when enabling Mesh and fixing the channel on the Omada Controller, if the EAP is rebooted, the wireless speed of clients will be affected. Below is the whole story:

With Mesh feature enabled on the Omada controller (Mesh is enabled by default), sometimes in order to get a higher speed, we may set the channel width to 80MHz and fix the channel manually in EAP radio settings.

When connecting to the SSID with the configuration above, the wireless clients will negotiate a high speed with the EAP. Now if we reboot the EAP and after a while when the wireless client connects back, the channel width and the negotiation speed will reduce as the following screenshot shows.

We are now working on it and a beta firmware to solve this issue is already finished. This issue will be completely fixed in the next official firmware release.

If you have the same issue, please feel free to contact us.

Note: This issue only affects EAP225-Outdoor V1.0 and EAP225 V3.0

2 Subscribe Bookmark

Comment

Thanks for addressing the issue of Low Wi-Fi speed when connecting to 5GHz of EAP devices. It very annoying when I work on my blog https://www.inspirationalquoteshub.com/

this is a very helpful article all the info is very informative and useful for all of us, keep it up. for wifi cctv camera installation services. https://www.ananditsolutions.com

We face low wi-fi speed many times when connecting. But this step-by-step guide must help me a lot to restore its speed. thanks for sharing this very helpful and informative article. I really enjoy reading this article. You can also check if you need a how-to guide on https://www.techsukhen.com.

Worth information about Low Wi-Fi speed when connecting to 5GHz of EAP devices. It helps me clear my confusion as i am doing Electronics and Communication Eng. https://feedgadgets.com/

12
upload
    upload
      Subscriptions