Disable L2TP on latest firmware cause 500 error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Disable L2TP on latest firmware cause 500 error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Disable L2TP on latest firmware cause 500 error
Disable L2TP on latest firmware cause 500 error
2023-11-12 03:05:53
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: ER605(UN)_V2_2.2.2 Build 20231017

For some reason, disabling one of my only L2TP server config cause the webserver to throw 500 error when pulling the lists:

 

 

Failed to execute call dispatcher target for entry '/admin/l2tp'. The called action terminated with an exception: ?:0: attempt to call method 'find' (a nil value) stack traceback: [C]: in function 'assert' ?: in function 'dispatch' ?: in function <?:196>

 

  0      
  0      
#1
Options
3 Reply
Re:Disable L2TP on latest firmware cause 500 error
2023-11-13 01:41:34

Hi @zhiyan114 

Thanks for posting in our business forum.

Recommend you upgrade to the 2.1.5 beta firmware first and try again this in the incognito mode.

If you can paste a screenshot here, that would be wonderful.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:Disable L2TP on latest firmware cause 500 error
2023-11-13 05:49:38

  @Clive_A Hey, thanks for the reply, unfortunately, I want to minimize the network downtime (since it takes well-over 3-5 minutes per reboot), so I kinda want to avoid doing that. In the meantime, I was able to fix it by loading up backup config, which set the L2TP state to enabled. Though, if I were to encounter this issue again in the future, I will remember to update this thread with a screenshot.

  0  
  0  
#3
Options
Re:Disable L2TP on latest firmware cause 500 error
2023-11-13 05:56:47

Hi @zhiyan114 

Thanks for posting in our business forum.

zhiyan114 wrote

  @Clive_A Hey, thanks for the reply, unfortunately, I want to minimize the network downtime (since it takes well-over 3-5 minutes per reboot), so I kinda want to avoid doing that. In the meantime, I was able to fix it by loading up backup config, which set the L2TP state to enabled. Though, if I were to encounter this issue again in the future, I will remember to update this thread with a screenshot.

OK. Please try the incognito mode as well when you access the admin web. Avoid any cache issue that may cause a problem with the config.

Let's see if it happens again or not.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options