Business Community > All Threads > ER605 v2 x wireless AP
< All Threads

ER605 v2 x wireless AP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 v2 x wireless AP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 v2 x wireless AP
ER605 v2 x wireless AP
2024-01-02 13:38:31 - last edited 2024-01-10 12:27:58
Tags: #WAN Setup #Routing #Network Connectivity #NAT #wifi
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.2

 

Hi everyone,

 

Let me make a brief and describe the situation.

 

Router: ER605 v2, firmware 2.2.2 Build 20231017 Rel.68869.
MTU = MRU = 1492
MSS clamping = auto
PPPoE


The modem with fiber optics connection is running as bridge. The MTU value recommended by the ISP is 1492.

 

Access point: GPT-2741GNAC-N1-SV (it is a fiber optics modem/router no longer used. It is set DHCP off and no NAT. It is working only as AP providing both 2,4 and 5 ghz connection).

 

The problem: some apps on smartphones connected to wifi do not work properly (like Twitter media, for example). This problem only happens on cellphones. When I run the same on computer also connected to the wifi, no problem. Also no problem while using cable connection.

I read that it seems to be related to MTU settings, however I did not find out how to adjust it correctly yet.

 

Everything worked fine before installing the ER605 that replaced the ISP router.

 

Thank you!

 

------------------

 

Some prints of my settings here:

 

ER605:

 

Secondary link is down, because cabling is not ready yet on that room.

 

 

 

Some settings of the wireless AP:

 

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:ER605 v2 x wireless AP-Solution
2024-01-10 12:27:44 - last edited 2024-01-10 12:27:58

Hi  @d0ugmac1! Tks for replying.

 

I was not able to make this test, because I can only change the settings and cause a connection failure during night time. Now the strangest thing: no changes done and suddenly all apps that were failing on smartphones connected to wifi started working properly. Have no idea what happened here.

 

Thx again!

Recommended Solution
  0  
  0  
#7
Options
7 Reply
Re:ER605 v2 x wireless AP
2024-01-03 02:47:54 - last edited 2024-01-03 02:49:03

Hi @Icaro 

Thanks for posting in our business forum.

Is this supposed to be a problem with the WIFI? You said it only happened on the WIFI devices. So, if this does not happen on all wired devices, watching the Twitter media from the desktop, you should check the WIFI settings.

 

At most, you check the LAN DNS server. Nothing else. I don't think this relates to the router. Why not swap with the old router and test again?

And what's the MTU and MRU on your old router? You should copy what was working to the new model.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:ER605 v2 x wireless AP
2024-01-04 12:41:24

Hi  @Clive_A !

 

The strangest part is that the problem happens only on wifi and on cellphones! When I connect a PC to the same wifi connection, no problem.


What I have already tried:
 

• back to the old router and no problem happened.
• then back to ER605: now I have just tried a different access point device and the same problem occurred. On both devices, the cryptography is set to WPA/WPA2-PSK.
• tried to set MRU = MTU = 1468 on ER605, but the connection stopped working. Changed back to 1492. When changed back to 1492 it took a long time to work again. Got no connection more than 10 minutes.


About your questions:


• the MTU is 1492 on the ISP default router. There is no MRU parameter nor MSS Clamping setting.

• LAN DNS: it is set the same as WAN DNS: primary 8.8.8.8 and secondary 1.1.1.1


Thank you!

  0  
  0  
#3
Options
Re:ER605 v2 x wireless AP
2024-01-04 13:30:50

  @Icaro 

 

Did you power cycle the router after making these changes?

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#4
Options
Re:ER605 v2 x wireless AP
2024-01-04 13:42:40

  @d0ugmac1 

 

Yes and no. Explain:

 

When changed MTU and MRU to 1468, I did not reboot the router. The connection stopped working and I found it did not accept that value for MTU and MRU.

Then I changed back to 1492, but still no connection despite of "connected" status on WAN screen.

 

And then I reboot the router. It took a long time to get back working, about 10 minutes after restarting and now with 1492 value set.

 

Thx!

  0  
  0  
#5
Options
Re:ER605 v2 x wireless AP
2024-01-04 14:24:11

  @Icaro 

 

Ok, leave the MRU alone (reset to default value as your internal devices won't likely care), set only the MTU to 1400 (to control your outbound fragmentation) and reboot your router.  Validate.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#6
Options
Re:ER605 v2 x wireless AP-Solution
2024-01-10 12:27:44 - last edited 2024-01-10 12:27:58

Hi  @d0ugmac1! Tks for replying.

 

I was not able to make this test, because I can only change the settings and cause a connection failure during night time. Now the strangest thing: no changes done and suddenly all apps that were failing on smartphones connected to wifi started working properly. Have no idea what happened here.

 

Thx again!

Recommended Solution
  0  
  0  
#7
Options
Re:ER605 v2 x wireless AP
2024-01-14 10:56:01

  @Icaro do you still not know what the solution is? This because an issue for me the last ER605 firmware update. IOT devices are fine however 4 of our Android keep getting booted the second we try to consum data 

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 701

Replies: 7

Tags

WAN Setup Routing Network Connectivity NAT
wifi
Related Articles
Inquiry about ER605 v2 Capablities
326 0
Unstable internet connection on ER605 v2
263 0
Wireguard Site-To-Site not working / ER605, V2, Firmware 2.2.2
655 0
Connecting ER605 router to RE550 wifi extender
648 0
Port Forwarding ER605
1591 0
VPN IPSEC IKEv2 on er605 v2
2340 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.