Business Community > All Threads > MSTP with multple loops
< All Threads

MSTP with multple loops

MSTP with multple loops

MSTP with multple loops
MSTP with multple loops
2024-07-05 14:40:13 - last edited 2024-07-12 01:29:20
Model: TL-SG3452XP  
Hardware Version: V2
Firmware Version: 2.20.1 Build 20231115 Rel.68992

Hello, I Have 8 switches I have to configure on 4 different locations in the building. Every location gets 2 switches that are connected with SFP+ DAC cables.

Connections between locations are with single mode fiber connections SFP+

 

In the serverroom are switches SW15 & SW16 and they connect to 3 other switch pairs in the building (SW17&SW18, SW19&SW20 and SW21&SW22) as shown in the pictue:

All switches are running instance 1 with vlan1-2 and instance 2 with vlan 3-4.

 

 

What I would like to achieve is to use MSTP on all 3 switch loops, but I am struggeling to get this working and I know that I cannot to this by just changing path cost.

 

I can really use some help to guide me in the right direction.

 

Thanks, Kim

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:MSTP with multple loops-Solution
2024-07-09 15:14:59 - last edited 2024-07-12 01:29:20

  @kshesq I did work by setting root instances (I have two) on two instead of one switch.

Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:MSTP with multple loops
2024-07-08 03:08:14 - last edited 2024-07-08 09:28:32

Hi @kshesq 

Thanks for posting in our business forum.

Not sure what mode you use, but should be configured like the guides below.

How to configure MSTP on L2 Managed switches using the new GUI

Spanning Tree Configuration in Omada SDN Controller Mode

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  2  
  2  
#2
Options
Re:MSTP with multple loops
2024-07-08 07:52:10

  @Clive_A well that setup is what I use. For all switches I use 2 routes 2000 and 300000 but on disconnecting the lower cost path I loose the network connection.

 

The above setup works on 1 loop, but not on multiple loops. I suspect that the root switch senses that there are other 2000 cost path routes left and does not use the 300000 route.

  0  
  0  
#3
Options
Re:MSTP with multple loops-Solution
2024-07-09 15:14:59 - last edited 2024-07-12 01:29:20

  @kshesq I did work by setting root instances (I have two) on two instead of one switch.

Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 224

Replies: 3

Related Articles
ERPS and MSTP
465 0
[REQ] STP/RSTP/MSTP....
373 2
Solving VLAN loops
985 0
Intermittent adoption loops
560 0
Configuration of multiple Switches
1173 0
CPE510 causing Network loops?
683 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.