Per-SSID wlanScheduleEnable: true blocks all client associations, no matter what action or time range I set. Only works again when I turn the schedule off completely.

Setup: SSID on VLAN 33, EAP720 1.3.3 / EAP650 1.3.11 / EAP-HD660 1.6.6, ER7206 1.4.3 gateway.

Tested on v6.2.14.11 first, then upgraded to v6.3.0.45 and tested again. Same behavior on both.

What I tried:

1. wlanScheduleEnable: true, action: 1 (Radio On), time range 8:01–21:00 every day, current time was inside the "on" window. Result: SSID does not show up in client scans, gateway vlan 33 clientNum drops to 0.

2. Switched action to 0 (Radio Off), same time range, still inside the window. Result: same thing, SSID still invisible. Per the spec and the user guide this should mean "off during the period, on outside" so right now it should be on. It's not.

3. Changed the time range to one that should currently be off. Result: same.

4. Hit Apply with no changes (saw this as a workaround in other threads). No effect.

5. Turned wlanScheduleEnable off. SSID came back, clients connect fine. Turned it back on, the problem came back.

Ruled out: WAN is fine (PPPoE up, no packet loss), other VLANs on the same controller work, ACL and DHCP on vlan 33 are correct, all APs are on the firmware version their controller recommends, broadcast is on, the spec text and the user guide both say the schedule is supposed to be time-conditional.