@d0ugmac1 yeah, web and telnet/ssh. standard on fiber modules IIRC.. PVID cannot be set to the SFP port, at least in controller mode.. The standard way is either adding an ip to the SFP device or...

@d0ugmac1 the sfp web Interface for controlling it as by default at 192.168.1.1/24 but I need the address set to the sfp interface. The idea is to get a route to inside the module for adminstration...

so, for example the eap615-wall.. has hardware-wise a Mediatek MT7621DAT 5-port-switch for which 4 are wired in. so, virtual switch shows 4 ports, first is poe in uplink green or orange depending on...

In the past when logging to the router , I got a linux shell.. now I get a cisco-like cli that does not appear functional at least when logged with the "Device Account" user/pass.. entering...

Hi: I need to do this in iproute-speak: ip addr add 192.168.1.100/24 dev eth0 for the er7206 device eth0 is the SFP internally This very simple operation is not possible at least in controller-mode...

The UI/design for Access Points that have ethernet ports is, in my opinion at best strange at worst completely wrong and unintuitve. Suggestion: Introduce a "virtual switch" device type, or reuse the...