Vincent-TP wrote Hi @Nvb2 Thanks for the update, and glad to hear that you have finally adopted the gateway. Regarding the switch installation issue you mentioned, I do not recommend proceeding with...

Following up on my previous post: After full reset and setting OC200 with fresh config and new site most went well except for the adoption of the ER707. I ran into issues related to subnet changes....

Vincent-TP wrote Hi @Nvb2 Great to hear that the firmware udpate issue has been resolved! If you encounter any further problems or have additional questions when adopting the device, feel free to...

MR.S wrote @Nvb2 I have two such routers, the same hardware version, I have not encountered any such problems. Try running it in stand alone without internet, since there is overlap on lan and wan it...

Vincent-TP wrote Hi @Nvb2 Thanks for posting here. To update the firmware of the ER707-M2, here is the suggestion: 1. Please use this setup: Fully isolated setup (direct PC ↔ ER707, no ISP modem) 2....

Hi all, I’m running into a blocking issue with a TP-Link Omada ER707-M2 and I’m hoping for confirmation or guidance from TP-Link staff or other users. Context: - ISP: Delta (Netherlands) - ISP...