Hi @smallfreak, Once you stated "internet router is equally ignorant" it's basically the end of any question about VLAN setup. You would need to upgrade your router to something that support VLANs to...

Hi @Winterwhite, Some alternatives to get above 1GB... Add another 10G copper switch (ex. DS105X) between the MC420L and ER7412-M2. The switch would negotiate the 10G and 2.5G connections...

Hi @notaek, Be sure "US" is the correct region for you device and that the device's version is correct. Usually the controller finds the most recent firmware that's correct for your device. Manually...

@Vincent-TP, appears to be working normally with eth1 disabled now. I'll post back to this thread if anything changes.

Hi @Thomas777, Have you verified that there are not any other devices using addresses within your dhcp pool range?

Hi @1TRUTH1GOD, I'm not sure what you mean by re-connect all the cameras manually as they are not devices that can be adopted by the controller. You do not need to unplug them while adopting the...