Wi-Fi Routers
Not seeing an option to toggle specific MLO bands in router settings. Expectation (based on screenshots from other users): What I see:
MLO NetworkWi-Fi 7Web GUI Management
0Helpful
81Views
Hello guys, I have a huge issue with the Wi-Fi on the BE550. I bought the BE550 today and spotted an issue with the Wi-Fi speed. It doesn't matter whether I use the 2.4G/5G or the MLO network; the spe
Wi-Fi 7MLO NetworkWi-Fi 6E
2Helpful
193Views
Hello, I am experiencing issues with upload speed when channel width is above 80MHz - it does not matter if it is 5GHz or 6GHz. ISP speed 2Gbps down / 600Mbps up - over ETH obtainable, but my Galaxy S
Network ConnectivityMLO Network2.5 GbpsWi-Fi 7Channel Width
0Helpful
347Views
Model & Firmware: Hardware Version: Archer BE805 v1.20 Firmware Version: 1.3.0 Build 20250710 rel.60037(5347) ISP Speed: 3 Gbps up / 3 Gbps down Issue Description: When using speedtest on my WiFi 6 de
Network ConnectivityWi-Fi 7MLO Network
By
Xeonsaga88
· Latest post 2025-09-23 02:46:52
by Joseph-TP
0Helpful
285Views
Hi, My iPhone 16 Pro runnign iOS 18.4 developer beta 4 cannot see the 6GHz SSID I set on BE550, and the phone stays on 5GHz when connected via MLO mode. Have tried to enable/disable PSC mode and picke
Network Connectivity6 GHzWi-Fi 7MLO Network
By
halden2714
· Latest post 2025-08-27 12:19:24
by halden2714
1Helpful
1583Views
Dear customer support representative, I have a tp-link BE900 and a BE805 at home, and I am trying to set up an EasyMesh setup using them. I would like to use the BE900 as the main router and the BE805
EasyMeshAccess Point ModeWi-Fi 7MLO Network
0Helpful
2769Views
To the tp-link router specialist, I've heard this before, but the EasyMesh on the Archer series routers from tp-link, which are heavily advertising Wi-Fi 7, is unable to mesh the essential MLO (Multi-
Feature RequestEasyMeshMLO Network
1Helpful
592Views
First, I am a network engineer working in IT for roughly 30 years. I have constant intermittent connection to the BE9300. This has occurred using 5g and MLO connections. At first I thought it was the
MLO NetworkNetwork Connectivity5G
By
Littlebike
· Latest post 2025-07-09 05:59:04
by Joseph-TP
0Helpful
380Views
During speed test, the router abruptly stops broadcasting all SSIDs (2.4 GHz, 5 GHz, 6 GHz and the MLO network). The outage lasts about 3–5 minutes, after which every SSID re-appears and clients recon
Wi-Fi 7Network ConnectivityMLO NetworkBE550 Pro
2Helpful
517Views
Confirmed that MLO is working fine with the following firmware version on the same client: Firmware Version: 1.1.6 Build 20240808 rel.26673(5553) Hardware Version: Archer BE800 v1.0 Could you please a
MLO NetworkFirmware UpdateWi-Fi 7
By
ExplorerZone
· Latest post 2025-07-03 09:16:31
by Joseph-TP
0Helpful
617Views