Deco
TroubleshootingMain Deco turned red light
This Article Applies to: All Deco models Typical problem description: 1. Main Deco turned red after creating the Wi-Fi name and password during the setup; 2. Main Deco went solid red after working nor
Highlighted ThreadOfficial
61Helpful
40103Views
Hi All, For any who is not aware, I have a found a workaround for the lack of separate SSIDs for the 2.4Ghz and 5Ghz bands and so far for me, it has resolved the issue with my legacy IoT devices not b
Highlighted Thread
By
CharlesRM
4Helpful
63Views
Configuration GuideHow to set up Ethernet Backhaul with your Deco devices
Ethernet Backhaul is a feature that makes it possible to wire the Deco units together to optimize the bandwidth and network stability. Normally, after wired Deco units with an Ethernet cable, the Ethe
Highlighted ThreadBackhaulOfficial
190Helpful
338957Views
This Article Applies to: Deco with 1.5.x and higher firmware versions Issue Description/Phenomenon: Some customers may report that the Network Optimization feature on their Deco app always displays th
OfficialHighlighted ThreadNetwork Optimization
84Helpful
22128Views
New SoftwareDeco X50(V1) 1.1.0
Hi All and @JoaoRamos, @knittl79 @macroth72 Hi All, Good news! Apart from the 1.6.0 firmware for Deco M5, the official firmware 1.1.0 for Deco X55/Deco X50 has been released recently, They would be th
Firmware UpdateOfficialHighlighted Thread1.1.0
53Helpful
6873Views
TroubleshootingDeco LAN speed is capped at 100m/s
Occasionally we received some feedback about the slow LAN speed from Deco and the typical description would be: "my internet bandwidth is over 200/500m/s, but I only got about 100m/s from Deco". After
Highlighted ThreadBackhaulOfficial
21Helpful
7154Views
This Article replied to: All Deco models. Recently, we have received some inquiries that the Deco network is green and working fine, but on the Deco APP, it said "Paint Your Home in Wi-Fi and let's be
OfficialLet's BeginHighlighted Thread
0Helpful
2077Views
TroubleshootingHow to set up Port Forwarding on the Deco app
Port Forwarding is used to make a device or service in your home network accessible to computers on the internet. Typical applications include allowing remote management to security cameras within the
Highlighted ThreadOfficialPort Forwarding
51Helpful
32155Views
Solution: Just turn off hw-offload in mikrotik bridge settings
Access Point ModeHighlighted Thread
By
qmp
2Helpful
52Views
DHCP address reservation does not work correctly. After a reservation was successfully made for a device with for example ip address 192.168.1.5, then when you return on a later moment to the address
Highlighted ThreadPort ForwardingAddress reservation
7Helpful
558Views