Archer VR200v: Multiple L2-bridges and VLANs with one-armed OPNSense router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer VR200v: Multiple L2-bridges and VLANs with one-armed OPNSense router
Model:
Archer A7
Hardware Version:
Firmware Version: Archer_VR200vv1_0.8.0_0.27_up_boot(180529)_2018-05-29_14.24.54
Hi,
we want to use an Archer VR200v as VDSL2-Vectoring modem, switch, AP and PBX/ATA. PPPoE, routing and firewalling wil be done with an one-armed OPNSense box.
I was able to create two bridges including VLAN_ID7 for the VDSL2V socket:
1) WLAN2.4+WLAN5+LAN1+LAN2+LAN3
2) PTM0.7+LAN4
This needs two ethernet cables to the OPNSense box (LAN4 + LAN3). Is there any way to configure an one-armed VLAN approach like
1) WLAN2.4+WLAN5+LAN1+LAN2+LAN3+LAN4
2) PTM0.7+LAN4.7
?
Thanks for any hint
Renne
Router: Archer VR200v