Archer MR200 network 3G - HSPA

Archer MR200 network 3G - HSPA
Archer MR200 network 3G - HSPA
2019-08-14 15:11:54 - last edited 2019-08-15 02:34:58
Model: Archer MR200
Hardware Version: V4
Firmware Version: 190307

I have a problem with my router MR200 that does not connect to the internet of the SIM card, in the area that we are exist HSPA+ signal, checked with an APP on my cell phone, so I found out HSPA is an improvement of the 3G network and according to the description of the router it recognizes these networks, by caution I updated the firmware to V4, so why don't you recognize it? , there is no way to select the type of 3G network to be used since the only options are 3G and 4G.

Thanks

Tengo un problema con mi router MR200 que no conecta con el internet de la tarjeta SIM, en el sector que me encuentro la señal es HSPA+, chequeado con una app en el celular, por lo que averigüé HSPA es una mejora de la red 3G y según la descripción del router reconoce estas redes, por precaución actualicé el firmware a V4, entonces ¿Por qué no la reconoce? , no hay forma de seleccionar el tipo de red 3G que se va a usar ya que las únicas opciones son 3G y 4G.

Gracias

 

0
0
#1
Options
4 Replies
Re:Archer MR200 network 3G - HSPA
2019-08-15 02:46:11

@Felipe_Acuna 

 

As you can see, the MR200 supports 3G, which includes HSPA+; so you can choose the network mode to 3G only and it will negotiate with the existing HSPA+ signal.

 

Network Type 4G: FDD-LTE B1/B3/B7/B8/B20 (2100/1800/2600/900/800 MHz)
TDD-LTE B38/B39/B40/B41 (2600/1900/2300/2500 MHz)
3G: DC-HSPA+/HSPA+/HSPA/UMTS B1/B8 (2100/900 MHz)

 

We usually regard 3/4G as common standards and it won't affect the performance. 

 

Good day. 

 

0
0
#2
Options
Re:Re:Archer MR200 network 3G - HSPA
2019-08-16 13:33:11

Thanks Kevin,

 

Yes, I selected the 3G option, but as you can see in the images below, it still does not recognize the network but on the cell phone if it shows the available network.

 

Regards

0
0
#3
Options
Re:Archer MR200 network 3G - HSPA
2019-08-17 16:48:32

Once the SIM card connects, the router it will switch to the best band, (LTE, HSDPA, 4G, 3G)

Are you testing the router with the same SIM that connects in your phone.

it appears from screen grab that the SIM in the TP-Lnk is not detecting a signal to connect.

 

¯\_(ツ)_/¯
0
0
#4
Options
Re:Re:Re:Archer MR200 network 3G - HSPA
2019-08-19 02:47:30

@Felipe_Acuna 

 

From the pictures attached, the signal strength is not good; 

 

Try to change another location to put the MR200 or adjust the antenna position. Even you can change another SIM card. 

 

After that, try to create the connection profile manually with the APN information. 

https://www.tp-link.com/support/faq/1663/ 

 

Good day. 

 

 

0
0
#5
Options