Unable to login at 192.168.0.254

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to login at 192.168.0.254

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to login at 192.168.0.254
Unable to login at 192.168.0.254
2012-12-29 14:06:30 - last edited 2021-08-30 08:03:17
Region : Canada

Model : TL-WR700N

Hardware Version : V1

Firmware Version :

ISP : ShawCable


I have just bought the device. I works fine as a AP out of the box. I want to use it as a repeater of my wireless network which uses a Linksys Simultaneous Dual Band N Router WRT400N

1. To do the setup, I have tried to login at 192.168.0.254 I cannot do this (a) using a wireless connection to a Linksys router which is connected to the cable modem and (b) wired connection to the router which is connected to the cable modem. The attempts get a timeout messaage.

2. The default gateway is 192.168.1.1. The DHCP server has the same address. My computer is using 192.168.1.101.

3. I use McAfee Internet Security software.

What can I do to solve the problem?
  8      
  8      
#1
Options
27 Reply
I found the answer
2012-12-29 15:13:27
1. Go to

http://www.tp-link.com/ca/products/details/?model=TL-WR700N#app

2. Go to the section on Repeater, follow the link and you arrive at

http://www.tp-link.com/ca/article/?id=390

The instructions are very clear. Although I have not reviewed, I suspect the instructions are of similar quality for setting the other modes.

I wish these instructions were included with the package or in the downloadable user guide. The user guide was useless.

The problem I had to address was to set the IP address for my computer to 192.168.0.10 so that I can access the management utility at 192.168.0.254 in order to programme the device as a repeater. I was having a problem because the IP address was automatically assigned by my wireless router (Linksys) which has an address of 192.168.1.1.

In summary, the instructions explained how to temporarily set up the IP address for my computer so that I can connect to the TP-Link device (WRT700N). I was then able to log into the managmenet utility page and make the settings.
  4  
  4  
#2
Options
This worked for me too!
2014-09-30 18:24:52
Hey stanflyer,

Thanks so much for posting this!

Totally worked for me and made my device usable.

Couldn't believe how I couldn't login for Repeater mode. Agree that they should of had more documentation out of the box.

Thanks again :cool:
  0  
  0  
#3
Options
Problems with routers WR700N
2015-12-17 07:01:12
The computer can not connect always comes Getting IP address, which should be done in these cases. please i need to solve this.
  2  
  2  
#4
Options
Re:Unable to login at 192.168.0.254
2015-12-23 20:00:01
nice
  1  
  1  
#5
Options
Tp-link tl-wr700n
2017-02-12 02:21:52
I am unable to login to 192. 168. 0. 254, I am using windows 7 , I tried using the link that stanflyer posted but it goes to a dead page
  6  
  6  
#6
Options
Re:Unable to login at 192.168.0.254
2017-02-12 15:12:13
Do you have default settings on the router?
  6  
  6  
#7
Options
Re:Unable to login at 192.168.0.254
2017-02-13 22:37:25
My default settings are 192.168.0.254 which is printed on the label on unit, I pressed reset but to set back to default, I am using windows 7 with internet explorer, I set up my computer to default to 192.168.0.254, but am unable to open that page.
Thank you for response,
  10  
  10  
#8
Options
Re:Unable to login at 192.168.0.254
2017-02-14 02:07:55
i have new TL-WA850RE Extender,.i think i configure already because all lights are stable,but still cant connect..i followed every step on manual.but unfortunately nothings happen..even on wireless connection its not appearing..pls some one help me about this matter...i really want to k[COLOR=#800000]now the difference between have and haven't using wifi extender...thank you very much. :(
  0  
  0  
#9
Options
Re:Unable to login at 192.168.0.254
2017-04-05 20:47:42
missed "http"? Try http://192.168.0.254
  5  
  5  
#11
Options
Re:Unable to login at 192.168.0.254
2017-12-13 14:49:53
I found my answer. Thks
  33  
  33  
#13
Options

Information

Helpful: 8

Views: 74272

Replies: 27