TP-Link TL-WA901ND - access point or range extender?
Hello guys,
let me explain you my issue.
i have a modem router Wi-Fi in a room in my house and I pulled one Lan cable to the other side of the house where I had in mind to connect the tp link in order to extend the wireless range. I don't want that tp link will work as typical range extender since I would like to benefit of the lan cable. Said that, who's Mode I have to select and how I have to configurare it properly? Thank you so muc
here the connection flow
main modem router WiFi --> lan cable to the other side of the house --> TP-Link connect to the lan port
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, to use the LAN cable to boost wifi signal, you can configure the TL-WA901ND as the access point mode.
Below is the setup instruction:
https://www.tp-link.com/support/faq/1603/
May it help.
- Copy Link
- Report Inappropriate Content
You can customize the wireless settings to improve the wireless performance, like wireless channel and channel width.
You can use channel 1, 6 and 11 and channel width 20MHz.
Besides, you can relocate the TL-WA901ND and change its antenna position.
Good day.
- Copy Link
- Report Inappropriate Content
Hello, to use the LAN cable to boost wifi signal, you can configure the TL-WA901ND as the access point mode.
Below is the setup instruction:
https://www.tp-link.com/support/faq/1603/
May it help.
- Copy Link
- Report Inappropriate Content
@Kevin_Z thank you so much! Any advanced setting is needed? Actually I already tried this procedure but wi fi signal became much unstable...
- Copy Link
- Report Inappropriate Content
You can customize the wireless settings to improve the wireless performance, like wireless channel and channel width.
You can use channel 1, 6 and 11 and channel width 20MHz.
Besides, you can relocate the TL-WA901ND and change its antenna position.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1972
Replies: 3
Voters 0
No one has voted for it yet.