No internet on client systems
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No internet on client systems
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
I've setup a small lab having 5 computers. I have a wireless router of TP Link Model TL-MR3220, a TP Link 8-Port Switch Model TL-SF1008D and an Internet USB.
Setup:
1. One end of the ethernet cable is plugged in to one of the router's LAN port and the other end is plugged in to the switch.
2. Five computers are each connected to that switch having IP addresses as 192.168.0.100 - 105 with subnet mask 255.255.255.0 and gateway and DNS is set to 192.168.0.1
3. Router's IP address is set to 192.168.0.1
4. USB providing internet access is plugged-in to the router's USB port.
Unfortunately, this setup won't work for me. I dont know why? Any of the five computers are unable to connect to internet. I am very disappointed please help me out.
Thanks,
Ovais
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
I've setup a small lab having 5 computers. I have a wireless router of TP Link Model TL-MR3220, a TP Link 8-Port Switch Model TL-SF1008D and an Internet USB.
Setup:
1. One end of the ethernet cable is plugged in to one of the router's LAN port and the other end is plugged in to the switch.
2. Five computers are each connected to that switch having IP addresses as 192.168.0.100 - 105 with subnet mask 255.255.255.0 and gateway and DNS is set to 192.168.0.1
3. Router's IP address is set to 192.168.0.1
4. USB providing internet access is plugged-in to the router's USB port.
Unfortunately, this setup won't work for me. I dont know why? Any of the five computers are unable to connect to internet. I am very disappointed please help me out.
Thanks,
Ovais