Deco M9 Plus V2 1.5.0 Firmware
When will the 1.5.0 firmware be available for deco m9 plus owners?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Since you mentioned before that you could still log in via http://tplinkdeco.net but not the Lan IP http://192.168.68.1 right?
Can I have a picture when you failed to log in?
By the way, why port 30000, did you open the port for the local http login on the Deco?
PS: please also make sure the Lan IP is 192.168.68.1, not changing to something else;
Thanks and wait for your reply.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Before updating to 1.5.0 i was able to go to this address accessing the web interface, now i can't.
Now i only can access the web ui using tplinkdeco.net using chrome and safari but not edge
- Copy Link
- Report Inappropriate Content
Hi, I have tested on my side and the IP address login is ok.
And could you please try to clear the browser history and DNS caches to have a look? Even test on another device?
By the way, when you try to ping tplinkdeco.net, what is the replying IP address?
Such as
Thanks!
- Copy Link
- Report Inappropriate Content
This is what i get pinging tplinkdeco.net
- Copy Link
- Report Inappropriate Content
You can also try the following
1. Run cmd mode in administrator and type "ipconfig /flushdns".
2. Please check if some other router or pc in your network has got the same ip some how "192.168.68.1".
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 7504
Replies: 26