Solution Virtual Server cannot be saved on Archer VR2100v
Solution Virtual Server cannot be saved on Archer VR2100v
This Article applied to:
Archer VR2100v(EU)_V1_201224
Issue Description/Phenomenon:
When trying to configure and save the Virtual Server rules (or Port Forwarding), the web interface page will jump back to the Basic page whenever you click on the "Save" button, and nothing is saved on the Virtual Server page.
Solution:
Please install the following beta firmware on your modem and the modification will be included in the next official firmware.
Download link:
How to update the firmware? Check this guide: https://www.tp-link.com/support/faq/1756/.
For other issues not mentioned here, it is NOT suggested to update this firmware, and please start a new thread with more details about the issue.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, the link presented https://static.tplink.com/beta/2021/202106/20210625/Archer_VR2100vV1_1.1.0_0.9.1_up_boot(210625)_2021-06-25_17.21.51.zip is incorrect, it should read
Thanks
- Copy Link
- Report Inappropriate Content
Forgot to mention copy and paste the new link into your web browser and it will download the file.
- Copy Link
- Report Inappropriate Content
Thank you and the link has been updated.
- Copy Link
- Report Inappropriate Content
Please i am trying to forward some ports to my connection. i have some ports such as (TCP: 10000 - 10099), (TCP: 3478 -34780) and UDP: 3478 - 3479). I have a tp-link router and im not sure how to input these ports with ranges. What number goes to external port and what number goes to internal port. Please help me out.
GHDSPORTS
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Are there any issues with your Archer VR2100v?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
TP-Link wrote
This Article applied to:
Archer VR2100v(EU)_V1_201224
Issue Description/Phenomenon:
When trying to configure and save the Virtual Server rules (or Port Forwarding), the web interface page will jump back to the Basic page whenever you click on the "Save" button, and nothing is saved on the Virtual Server page.
Solution:
Please install the following beta firmware on your modem and the modification will be included in the next official firmware.
Download link:
How to update the firmware? Check this guide: https://www.tp-link.com/support/faq/1756/.
For other issues not mentioned here, it is NOT suggested to update this firmware, and please start a new thread with more details about the issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2832
Replies: 13
Voters 0
No one has voted for it yet.