Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Maybe yes , maybe not. It depends of your configuration. My scheduled reboot never worked, i had to power off/on because after the scheduled reboot some devices had problem connecting to the internet . Also if you can check your MTU settings with tcp analyzer "speedguide dot net" if something is red then you have a problem ( as i wrote before it depends on your configuration )
- Copy Link
- Report Inappropriate Content
@TP-Link Is there any estimate or a thread about the same new features in the Deco M4?
- Copy Link
- Report Inappropriate Content
@David-TP seriously, TPLINK should consider hire more engineers. This beta program have FAILED with success! Just signed on first day and was very frustrating.
No reliable software / hardware.
I am open to suggestions for another vendor.
- Copy Link
- Report Inappropriate Content
@Tp-Link any response?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thank you for the notification.
These two features: signal source and connection preference will be added to Deco M9 plus and Deco M4 as well, which is one thing for sure. But the uncertainty is about the ETA and so far I haven't got updated news yet.
RobsonT Thanks for your suggestions.
I see you are still on the first version of 1.6.0 beta-20210818 and I wonder whether you have tried the latest 20220307?
The reasons which caused network instability might vary and I see one user is extremely happy with the firmware, while the others complain a lot. so the firmware upgrade will improve the network stability, but not all of them. So normally, we would love to take cases one by one if users would like to cooperate with us for further troubleshooting.
Currently, if you would like to spend a little more time, it would be highly appreciated if you could send an email to support.forum@tp-link.com with some details.
- Copy Link
- Report Inappropriate Content
- Being able to set a preferred node per device is nice, however your language of "preferred" is incorrect. It will ONLY connect ot that node, and appears to be blacklisted on the others. I see that is says that in small print in the app now. It would be nice to have it actually mean "preferred" vs. "dedicated to."
It is a nice idea and I have consulted the engineers so far they haven't answered and I will update later with further improvement.
- I scheduled the auto-reboot last night for the first time at 5am. Upon waking up at 7am, I had no internet. Decos were all had green light, but the system simply had no connection to the internet. I tried to reboot the system using the app, and "something went wrong." I power cycled the main Deco to resolve it. Are there logs I can send you?
As far as I know, 1.6.0 beta hasn't made changes to MTU settings and if you didn't have this issue before, it might not be related to MTU.
And you might need to export the log before manually rebooting the Deco via web UI. I will attach more details later in the email and please wait for a moment.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
About the MTU on PPPoE, there is defenatly a change in MTU settings on this beta firmare.
I had this problem with all 1.6.0 firmware, reverting back to 1.5.xx corrected the MTU.
I realized that with beta firmware the IKEv2 VPN was lagging so much that made the connection unusable.
Going back to 1.5.XX IKEV2 was working back to normal.
IKEv2 VPN connections are sensitive in wrong MTU settings.
- Copy Link
- Report Inappropriate Content
@David-TP Appreciate your response. Hopefully it gets rolled out soon. Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 242738
Replies: 862
Voters 5
