Deco M5 1.7.4/1.7.6

Deco M5 1.7.4/1.7.6

Deco M5 1.7.4/1.7.6
Deco M5 1.7.4/1.7.6
2021-08-24 02:20:05 - last edited 2024-03-19 00:57:30
Model: Deco M5  
Hardware Version:
Firmware Version:

Current Release

 

For Deco M5(V1/V2/V3/V3.2)

Deco M5_1.7.6 Build 20240305 for EU version

Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)

 

Modifications and Bug Fixes:

1. Improved system stability.
2. Fixed several security vulnerabilities.

 

 

---------------------------------------------------------------------------------------------------

History Release

 

For Deco M5(V1/V2/V3/V3.2)

Deco M5_1.7.3_Build 20230906

New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.

 

For Deco M5(V1/V2/V3/V3.2)

Deco M5_1.7.1_Build 20230608

Modifications and Bug Fixes:

1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.

 

 

For Deco M5(V1/V2/V3/V3.2)

Deco M5_1.6.5_Build 20230110

 

Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.

 

 

For Deco M5(V1/V2/V3/V3.2)

Deco M5_1.6.1_20220818

 

  • Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
  • 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP,  you could wait for a while or a firmware upgrade via web UI is recommended.

 

Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.

Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.

 

 

For Deco M5(V1/V2/V3/V3.2) 

Deco M5_1.6.0_220525

 

New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.

3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.

4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS

5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP

6. Added a prompt when the Ethernet link rate goes down to 100Mbps.

7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.

8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
 

 

Related Articles: 

Frequently Asked Questions on Deco Firmware Update

Deco Monthly Recap- Check What's Currently Going on With Deco

 

  14      
  14      
#1
Options
833 Reply
Re: [New Firmware] Deco M5 1.6.0
2021-08-24 10:55:47

@TP-Link Upgrade works flawless

Wired Internetspeed is half of provider speed (tested with deco app 500 mbps, provider speed 1gbit)

Was with fw 1.5.3 the same

  15  
  15  
#2
Options
Re: [New Firmware] Deco M5 1.6.0
2021-08-24 18:52:03 - last edited 2021-08-24 18:52:57

@TP-Link Thank you for releasing this. It is working good so far.

 

On my side I haven't noticed any impact on ISP bandwidth, and speed tests are looking good.

Just had to reboot and run network optimization once because one of the units was ignoring the selected source choice.

Besides the much awaited and needed source selection feature, all other feature were a great addition!

 

On a side note, being able to fully manage the network without the app would be very useful.

Looking forwared for the public release!

 

PS: running 6 units here

  2  
  2  
#3
Options
Re: [New Firmware] Deco M5 1.6.0
2021-08-24 19:51:30

@TP-Link When will this be available for the M9??

  9  
  9  
#4
Options
Re: [New Firmware] Deco M5 1.6.0
2021-08-25 03:15:05

@Seb80  Hi, I have not been informed of the estimated date for M9 Plus yet.

 

@Holger 

Were you trying to say, after updating the 1.6.0, the wired speed from main Deco is still 500m/s, half of the bandwidth from the provider, no improvement comparing with 1.5.3?

If yes, Did Deco work on the wireless router or access point?

Since the current issue is not related to firmware 1.6.0 anymore, would you be kind to start a new thread and provide me some screenshots about the speed test results, from Deco, from the ISP modem?

 

  0  
  0  
#5
Options
Re: [New Firmware] Deco M5 1.6.0
2021-08-25 08:29:44
New thread was created
  2  
  2  
#6
Options
Re: [New Firmware] Deco M5 1.6.0
2021-08-25 09:04:20

@TP-Link working perfectly on my M5's, would be great to get the same functionality on the M9's. 

 

As previously noted, once the manual source had been set - the device needed a reboot. It's trippled the download speed from my 3rd floor M5 😃 Which is now routing via my 2nd floor M9 to my 1st floor M5 😃 

 

Thank you for yours and the dev teams work :-) 

  0  
  0  
#7
Options
Re: [New Firmware] Deco M5 1.6.0
2021-08-26 13:22:27

@TP-Link After upgrading to firmware 1.6.0 I am having trouble with my wifi enabled treadmill not connecting. I shows up as an connected client (192.168.0.105) in the Deco app but the treadmill sais it is not connected. I have checked the log and see some errors but I dont understand what it says. I see that it has something to do with the treadmill connection because of the ip address (192.168.0.105). Here is some of the log.

 

Thu Aug 26 14:52:46 2021 daemon.err udhcpd[7721]: Received DISCOVER
Thu Aug 26 14:52:46 2021 daemon.err udhcpd[7721]: clear ip 6900a8c0
Thu Aug 26 14:52:46 2021 daemon.err udhcpd[7721]: Sending OFFER of 192.168.0.105
Thu Aug 26 14:52:46 2021 daemon.err udhcpd[7721]: Sending ACK to 192.168.0.105
Thu Aug 26 14:52:46 2021 daemon.err udhcpd[7721]: clear ip 6900a8c0
Thu Aug 26 14:52:48 2021 daemon.err udhcpd[7721]: Sending ACK to 192.168.0.105
Thu Aug 26 14:52:48 2021 daemon.err udhcpd[7721]: clear ip 6900a8c0
Thu Aug 26 14:52:52 2021 daemon.err client_mgmt: client(7C-DD-90-AD-D1-B9) not found in arp table disconnect_counter=1
Thu Aug 26 14:52:52 2021 daemon.err client_mgmt: client(66-32-9A-AC-4F-22) not found in arp table disconnect_counter=1
Thu Aug 26 14:52:52 2021 daemon.err client_mgmt: client(C4-DD-57-15-6D-4B) not found in arp table disconnect_counter=1
Thu Aug 26 14:52:52 2021 daemon.err client_mgmt: client(FE-D8-AB-49-30-78) not found in arp table disconnect_counter=1
Thu Aug 26 14:53:12 2021 daemon.err client_mgmt: client(7C-DD-90-AD-D1-B9) not found in arp table disconnect_counter=2
 

  3  
  3  
#8
Options
Re: [New Firmware] Deco M5 1.6.0
2021-08-26 20:56:57 - last edited 2021-08-27 08:03:11

Updated my 5x Deco M5 to the 1.6 firmware.

 

Unfortunately even when selecting the connection preference to the closest deco devices are still connecting to decos alot further away.

 

Rebooted both all the decos and the device's made no difference. Here is a TPLINK tapo plug and a wyze cam. Both ignoring the much closer and preferred deco 

 

  6  
  6  
#9
Options
Re: [New Firmware] Deco M5 1.6.0
2021-08-27 01:15:30

@Lordvader 

Hi, the feedback is very valued for us and May I know the model number of your Tapo plug and wyze cam?

Would powering off/on these smart devices make any difference?

By the way, I would like to follow up on your case by email and please have a check of your email box.

Thank you very much.

  0  
  0  
#10
Options
Re: [New Firmware] Deco M5 1.6.0
2021-08-27 01:25:21

@RoarE 

Hi, Did this issue just start updating the firmware 1.6.0?

Would restarting the treadmill and Deco make any difference?

By the way, may I know the model number of the treadmill?

  0  
  0  
#11
Options

Information

Helpful: 14

Views: 210220

Replies: 844

Related Articles