Business Community > Routers > How to Wake-on-LAN over Internet with TL-R480T+
< Routers

How to Wake-on-LAN over Internet with TL-R480T+

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to Wake-on-LAN over Internet with TL-R480T+

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to Wake-on-LAN over Internet with TL-R480T+
How to Wake-on-LAN over Internet with TL-R480T+
2013-07-14 11:19:54 - last edited 2021-08-21 03:26:14
Region : Vietnam

Model : TL-R480T+

Hardware Version : V5

Firmware Version : 5.1.0 Build 20120510 Rel.58987s

ISP : CMC Telecom

Hi, I have successfully wake my computer from another LAN PC.
Now I want to configure my router so that my PC can be waken from the internet.
Please show me how to do this.
Thank you very much!
  0      
 
  0      
 
#1
Options
4 Reply
Re:How to Wake-on-LAN over Internet with TL-R480T+
2013-07-17 17:48:24 - last edited 2021-08-21 03:26:14
you'd better make a DHCP reservation(Network->LAN->DHCP reservation) in advance for your PC needed to be waked up, then you can set the Virtual Server to open port for this IP address client, the port No. can be random and i think the no. beyond 2000 is better.

After the two steps finished, you can use the tool like Depicus to wake the PC up.
  0  
  0  
#2
Options
Re:How to Wake-on-LAN over Internet with TL-R480T+
2013-07-17 21:11:27 - last edited 2021-08-21 03:26:14
I have done these steps already:
- DHCP reservation
- IP-MAC binding in Firewall section
- NAT UDP port 9 to the reserved IP address
But when I use the tools like wakeonlan.me, depicus... It didn't work :(
I have tried to NAT UDP port 9 to another PC in LAN and used WOL sniffer to track the magic packets. The packets are received on that PC (running windows 7) but the PC I want to wake is running CentOS 6.4, and I don't know how to track the magic packets.
  0  
  0  
#3
Options
Re:How to Wake-on-LAN over Internet with TL-R480T+
2013-07-26 11:34:36 - last edited 2021-08-21 03:26:14
when you use the tool liek Decius, the IP address would be your WAN IP while MAC is the PC under waiting, hope this help.

htl wrote

I have done these steps already:
- DHCP reservation
- IP-MAC binding in Firewall section
- NAT UDP port 9 to the reserved IP address
But when I use the tools like wakeonlan.me, depicus... It didn't work :(
I have tried to NAT UDP port 9 to another PC in LAN and used WOL sniffer to track the magic packets. The packets are received on that PC (running windows 7) but the PC I want to wake is running CentOS 6.4, and I don't know how to track the magic packets.
  0  
  0  
#4
Options
Re:How to Wake-on-LAN over Internet with TL-R480T+
2013-07-29 09:08:21 - last edited 2021-08-21 03:26:14
I always used my WAN IP when I tried waking up my PC over internet.
The problem now is: how to know the magic packets is forwarded to the right linux PC, because I have successfully received the magic packets on windows PC.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1118

Replies: 4

About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.