Forums

Stories

Knowledge Base

Home Network Community > Deco > Deco M9 Plus 1.6.3

< Deco

New Release Deco M9 Plus 1.6.3

New ReleaseDeco M9 Plus 1.6.3

David-TP

2022-07-29 08:56:39 - last edited 2024-03-14 03:30:28

Posts: 9927

Helpful: 1303

Solutions: 850

Stories: 9

Registered: 2020-04-14

Deco M9 Plus 1.6.3

2022-07-29 08:56:39 - last edited 2024-03-14 03:30:28

Tags: #Firmware Update #Highlighted Thread #Official

Model: Deco M9 Plus

Hardware Version:

Firmware Version:

Current Release

For Deco M9 Plus(V1/V2/2.2)

Deco M9 Plus_1.6.3_Build_20231225

Release Note:

1. Fix the potential security vulnerability and its related problem.
2. Improve system stability and security.

---------------------------------------------------------------------------------------------------

History Release

For Deco M9 Plus(V1/V2/2.2)

Deco M9 Plus_1.6.2_Build_20230906

Release Note:

1.Fixed the bug that parental control doesn't take effect.

For Deco M9 Plus(V1/V2/2.2)

Deco M9 Plus_1.6.1_Build 20230403

Release Note:

1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.

2. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.

3. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.

4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.

5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.

6. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.

7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.

8. Fixed the bug that the built-in speedtest has low speed test results.

Notes:
1. This firmware downgrade could be done via firmware recovery-How to use firmware recovery.

2. Please update your Deco APP to the latest version for the new features.
3. If there are non-1.6.0 models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.

4. You may miss some new features when Deco is set to Access Point mode.

Related Articles:

Frequently Asked Questions on Deco Firmware Update

Deco Monthly Recap- Check What's Currently Going on With Deco TL-WA850RE V7 Adds the Support of Customizing Password and Encryption Type

418 Reply

MorrisAGE

LV2

2022-08-12 08:16:31 - last edited 2022-08-12 08:19:22

Posts: 47

Helpful: 10

Solutions: 1

Stories: 0

Registered: 2019-06-10

Re:Deco M9 Plus 1.6.0

2022-08-12 08:16:31 - last edited 2022-08-12 08:19:22

@David-TP

Many thanks for the effort. Check the caption and link.... it says v1 but linked to v2 firmware and it says v2 but linked to v1 firmware..... oversight I guess....haha

#22

David-TP

2022-08-12 08:22:40

Posts: 9927

Helpful: 1303

Solutions: 850

Stories: 9

Registered: 2020-04-14

Re:Deco M9 Plus 1.6.0

2022-08-12 08:22:40

@MorrisAGE

Ahh, I haven't released though and It has been updated now.

Thank you very much.

Deco Monthly Recap- Check What's Currently Going on With Deco TL-WA850RE V7 Adds the Support of Customizing Password and Encryption Type

#23

MorrisAGE

LV2

2022-08-12 23:42:12

Posts: 47

Helpful: 10

Solutions: 1

Stories: 0

Registered: 2019-06-10

Re:Deco M9 Plus 1.6.0

2022-08-12 23:42:12

@David-TP

Updated all my decos with V1 and V2 versions of 1.6.0.... so far so good..... was running the 1.5.0 test version earlier but 1.6.0 looks like is faster than before....

#24

vincer50

LV1

2022-08-13 02:54:51

Posts: 1

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2022-08-13

Re:Deco M9 Plus 1.6.0

2022-08-13 02:54:51

David-TP wrote

Hi @aspaviento Mjather and All,

The 1.6.0 firmware for V1 has been uploaded as well and the previous fixes of issues reported on the 1.6.0 of Deco M5 also have been merged into the latest 1.6.0 build20220810 version.

Please reach out to the first post to install the beta firmware.

Thank you very much.

Best regards.

PS: Currently we also have 1.6.0 beta for Deco X55 V1 and if you are interested, please leave me a message.

Hi @David-TP. How about 1.6.0 beta for the X68? Will it be available anytime soon?

#25

takitkat

LV1

2022-08-13 07:53:15 - last edited 2022-08-13 07:53:41

Posts: 4

Helpful: 8

Solutions: 0

Stories: 0

Registered: 2022-03-19

Re:Deco M9 Plus 1.6.0

2022-08-13 07:53:15 - last edited 2022-08-13 07:53:41

@David-TP

That's good news for us. Thank you for unveiling beta@M9+_v1.X.

I use two beta M9+ with three X90. It seems like working well. But X90 doesn't support beta features so I can't use "Customizing Signal source" and "Customizing clients connection preference". I will gladly wait for new firmware for X90.

Before(I can't change the signal source)

After(I can change the signal source)

#26

DiceKey

LV2

2022-08-13 08:24:33

Posts: 20

Helpful: 8

Solutions: 0

Stories: 0

Registered: 2020-07-25

Re:Deco M9 Plus 1.6.0

2022-08-13 08:24:33

@David-TP I tried changing the connection preferences of my smart bulbs and switches (under Smart), but it's always giving me the error, "Failed to save your settings. Please try again later." I tried rebooting all Decos but it still won't let me save my changes.

However, I could save connection preferences for devices under Client with no problem.

What can I do to resolve this? Thank you.

(FYI: I have two Deco M9 Plus V1, one Deco M9 Plus V2, and one Deco M5 -- all running on firmware 1.6.)

#27

aspaviento

LV1

2022-08-14 05:48:47

Posts: 12

Helpful: 27

Solutions: 0

Stories: 0

Registered: 2022-01-23

Re:Deco M9 Plus 1.6.0

2022-08-14 05:48:47

@David-TP many thanks for your reply and also for your effort!

#28

David-TP

2022-08-15 07:06:29

Posts: 9927

Helpful: 1303

Solutions: 850

Stories: 9

Registered: 2020-04-14

Re:Deco M9 Plus 1.6.0

2022-08-15 07:06:29

@DiceKey

Hi, Thanks for the feedback.

Currently, Deco M9 plus could work as a smart home hub and Deco M5 couldn't and I think it might be related.

Could you please help me do a simple test when you are available:

1. Please change another satellite Deco M9 plus as the connection preference, instead of M5, and check whether you could get the same error on the smart devices.

Wait for your reply.

Best regards.

Deco Monthly Recap- Check What's Currently Going on With Deco TL-WA850RE V7 Adds the Support of Customizing Password and Encryption Type

#29

DiceKey

LV2

2022-08-15 07:13:18

Posts: 20

Helpful: 8

Solutions: 0

Stories: 0

Registered: 2020-07-25

Re:Deco M9 Plus 1.6.0

2022-08-15 07:13:18

@David-TP Hi, I tried changing connection preference to a Deco M9 satellite node and I'm still getting the same error message.

David-TP wrote

@DiceKey

Hi, Thanks for the feedback.

Currently, Deco M9 plus could work as a smart home hub and Deco M5 couldn't and I think it might be related.

Could you please help me do a simple test when you are available:

1. Please change another satellite Deco M9 plus as the connection preference, instead of M5, and check whether you could get the same error on the smart devices.

Wait for your reply.

Best regards.

#30

David-TP

2022-08-15 11:32:18

Posts: 9927

Helpful: 1303

Solutions: 850

Stories: 9

Registered: 2020-04-14

Re:Deco M9 Plus 1.6.0

2022-08-15 11:32:18

@DiceKey

Thanks for the update.

If temporarily removing Deco M5 from the Mesh, only leaving Deco M9 plus units, would the same error show up again?

If yes, please refer to the following picture to help me get the Deco APP log:

Thank you very much.

Best regards.

Deco Monthly Recap- Check What's Currently Going on With Deco TL-WA850RE V7 Adds the Support of Customizing Password and Encryption Type

#31

New Release Deco M9 Plus 1.6.3

New Release Deco M9 Plus 1.6.3

Current Release

For Deco M9 Plus(V1/V2/2.2)

Deco M9 Plus_1.6.3_Build_20231225

Release Note:

History Release

For Deco M9 Plus(V1/V2/2.2)

Deco M9 Plus_1.6.2_Build_20230906

Release Note:

For Deco M9 Plus(V1/V2/2.2)

Deco M9 Plus_1.6.1_Build 20230403

Information

Voters 2

Tags