Remove fot/stand on C100
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How do I remove the fot/stand on C100? Or rather the actual "leg".
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Solla-topee
Did some testing and found out it's just to remove the fot base and then remove the rubber plug and in there it is a screw. No seals are broken, therefore no warranty issues.
- Copy Link
- Report Inappropriate Content
Update and correction:
There are two screws below the C100 camera, you could unscrew them first. As the original poster shared, you should be able to remove the base without break the camera.
------------------
The base of Tapo C100 camera does not seem to be a detachable design while tested in the lab, we do not recommend force breaking or removing the part as the disassembled parts can void the device warranty as RMA policy mentioned here. Hope can provide any help.
- Copy Link
- Report Inappropriate Content
@Solla-topee
Did some testing and found out it's just to remove the fot base and then remove the rubber plug and in there it is a screw. No seals are broken, therefore no warranty issues.
- Copy Link
- Report Inappropriate Content
@3-15_characters Thanks for the correction and sharing solution here.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 496
Replies: 3
Voters 0
No one has voted for it yet.