Solution 464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers
This Article Applies to:
TP-Link 4G/5G routers
Background:
With More and more SIM service providers gradually implementing 464XLAT mechanism in their services, after inserting the SIM card into TP-Link 4G/5G routers, some users might report that there is no internet access or certain Apps/websites can't be accessed. When checking the internet status, the router obtains an IPv6 address without an IPv4 address.
Available Solution:
The following beta versions have introduced 464XLAT support. It is suggested to install the specific version and check whether the reported issue can be fixed.
***Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20, and x.30 versions. Please note that the x.0, x.20, and x.30 are different versions and are unable to use the same firmware.
| Archer NX600(EU)_V2 | Archer_NX600_V2_20250613_Beta |
| Archer NX200(EU)_V2 | Archer NX200_V2_20250430_Beta |
| Archer NX200(EU)_V1 | Archer NX200_V1_1.6.0_250529_Official |
| Archer MR600(EU) V3 | Archer_MR600(EU)_V3_250429_Beta |
| Archer MR600(EU) V2 | |
| Archer MR600(EU) V1 | Archer_MR600(EU)_V1_20231127_Beta |
| Archer MR500(EU) V1 | Archer_MR500(EU)_V1_250605_Beta |
| Archer MR400(EU) V4.30 | Archer_MR400(EU)_V4.30_230928_Beta |
| Archer MR200(EU) V6 | Archer_MR200(EU)_V6_24040425_Beta |
| Archer MR200(EU) V5 | Archer_MR200(EU)_V5_24040425_Beta |
| Archer MR200(EU) V5.20 | Archer_MR200(EU)_V5.20_230815_Beta |
| Archer MR200(EU) V5.30 | Archer_MR200(EU)_V5.30_230816_Beta |
| TL-MR6400(EU) V7 | TL-MR6400(EU)_V7_250515_Beta |
| TL-MR6400(EU) V5.30 | TL-MR6400(EU)_V5.30_230801_Beta |
| TL-MR6400(EU) V5.20 | TL-MR6400(EU)_V5.20_230815_Beta |
| TL-MR6400(EU) V5 | TL-MR6400(EU)_V5_20240425_Beta |
| TL-MR100(EU) V2 | TL-MR100(EU)_V2_240313_Beta |
Do let the community know how the beta version works. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, welcome to the community.
Here is one for NX510v, and I've let you a private message.
But there hasn't been any for NE210-Outdoor. May I know your SIM carrier? Were both devices offered by the SIM carrier?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
@Sunshine Hi, SIM carrier is EE UK - I bought the Outdoor 5g separately.
- Copy Link
- Report Inappropriate Content
Finally NX200 V1, got firmware update and working XLAT with jio india. thanks a lot TPLINK team.
Later firmware version updated as below.
Firmware Version:1.6.0 3.0.0 v60a2.0 Build 250529 Rel.55411n Hardware Version:Archer NX200 v1.0 00000000
- Copy Link
- Report Inappropriate Content
Finally NX200 V1, got firmware update and working XLAT with jio india. thanks a lot TPLINK team.
Later firmware version updated as below.
Firmware Version:1.6.0 3.0.0 v60a2.0 Build 250529 Rel.55411n Hardware Version:Archer NX200 v1.0 00000000
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
This fix appears to have worked. Although I have no idea why the modem stopped accessing the internet. The modem had internet and wifi lights on plus 2 bars but no internet.
After running the upgrade it appears to work now. I have a question though: There is an imprint across all of the settings saying for internal TPlink use only. Debug. Will this be removed at some stage? I suppose it isn't important but it does make it hard to read the settings.
Thanks anyway for the fix.
Regards
Bluey
- Copy Link
- Report Inappropriate Content
Has anyone experienced the (Internal error: 1) after using the beta image on the MR600 router?
If yes, what is the fix for it?
- Copy Link
- Report Inappropriate Content
Hi, thanks for the update.
The official version will remove the watermark. Currently, it can't be removed on the beta version.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, is your Archer MR600_V3?
When will the internal error pop up on the web UI? For example you need to click any specific settings?
I think you can backup the current internet settings, then reset the Archer MR600 to see whether the error is still prompted under the default settings.
If not, I think there might be some internal conflicts in the previous network.
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 49
Views: 125448
Replies: 465
Voters 7
