WiFi router not working Archer C64

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WiFi router not working Archer C64

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WiFi router not working Archer C64
WiFi router not working Archer C64
2023-05-01 08:37:15 - last edited 2023-05-05 06:45:21
Model: Archer C64  
Hardware Version: V1
Firmware Version:

Hi there, I recently bought TP link Archer C64. It worked well for 2 days. So, after working for 2 days, on the third day, No led was blinking and whenever I turn off and on the power source, all LEDs blink at once and the internet symbol led is red and then again back to dead. I have tried in multiple power ports etc. Unable to diagnose what's the issue, please let me know.

  1      
  1      
#1
Options
1 Accepted Solution
Re:WiFi router not working Archer C64-Solution
2023-05-05 06:45:02 - last edited 2023-05-05 06:45:08

Hello @c341nn 

 

Thank you for posting on the TP-Link Community.
 

If the router can no longer be powered on, please check the below suggestions and proceed: 
1. Please be sure you are using the original power adapter, and ensure that the power button on the back has turned on.
2. You may try another power adapter with the same power specification, which is 12V = 1A.
3. Try to reset it by holding the reset button for 10s or longer to see if it will change anything.
4. Is there any power outage/bad weather before it stops working?

 

If nothing helps, it's suggested to contact the local tech support to be advised further:
https://www.tp-link.com/support/contact-technical-support/#Hotline-Support

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:WiFi router not working Archer C64-Solution
2023-05-05 06:45:02 - last edited 2023-05-05 06:45:08

Hello @c341nn 

 

Thank you for posting on the TP-Link Community.
 

If the router can no longer be powered on, please check the below suggestions and proceed: 
1. Please be sure you are using the original power adapter, and ensure that the power button on the back has turned on.
2. You may try another power adapter with the same power specification, which is 12V = 1A.
3. Try to reset it by holding the reset button for 10s or longer to see if it will change anything.
4. Is there any power outage/bad weather before it stops working?

 

If nothing helps, it's suggested to contact the local tech support to be advised further:
https://www.tp-link.com/support/contact-technical-support/#Hotline-Support

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 1

Views: 564

Replies: 1

Related Articles