Home

Forums

Stories

Knowledge Base

Business Community > Pharos Wireless Bridges > cant connect to IP for device using 192.168.0.254

< Pharos Wireless Bridges

cant connect to IP for device using 192.168.0.254

Snapper-69

2024-02-29 05:03:35 - last edited 2024-09-06 03:07:33

Posts: 1

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-02-29

cant connect to IP for device using 192.168.0.254

2024-02-29 05:03:35 - last edited 2024-09-06 03:07:33

Model: CPE210

Hardware Version: V3

Firmware Version:

cant connect to the cpe ip address, have used these in the past but now cant configure the devices

1 Accepted Solution

Hank21

2024-03-01 03:11:35 - last edited 2024-09-06 03:07:33

Posts: 3673

Helpful: 718

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:cant connect to IP for device using 192.168.0.254-Solution

2024-03-01 03:11:35 - last edited 2024-09-06 03:07:33

Hi @Snapper-69，

To login to the web UI of the CPE, please refer to the following steps:

1. Connecting the CPE to your computer, the topology should be like connecting the CPE's LAN0 port to the PoE port of the PoE adapter, connecting the computer to the LAN port of the PoE adapter, and plug the PoE adapter into the power socket.

2. Assigning a static IP address to your computer, like 192.168.0.10/255.255.255.0

3. Launch a web browser, enter 192.168.0.254 in the address bar and press the Enter Key. Enter admin (all lowercase) for both username and password to login.

Here is a FAQ which provides a detailed setup walkthrough: https://www.tp-link.com/support/faq/710/

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Recommended Solution

6 Reply

d0ugmac1

LV5

2024-02-29 16:35:24 - last edited 2024-03-01 01:56:24

Posts: 2128

Helpful: 778

Solutions: 193

Stories: 0

Registered: 2022-03-05

Re:cant connect to IP for device using 192.168.0.254

2024-02-29 16:35:24 - last edited 2024-03-01 01:56:24

@Snapper-69

Did you factory default them?

If you have wireshark, you can sniff the traffic on the CPE210 port to see what IP it is using, if any.

<< Paying it forward, one juicy problem at a time... >>

Hank21

2024-03-01 03:11:35 - last edited 2024-09-06 03:07:33

Posts: 3673

Helpful: 718

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:cant connect to IP for device using 192.168.0.254-Solution

2024-03-01 03:11:35 - last edited 2024-09-06 03:07:33

Hi @Snapper-69，

To login to the web UI of the CPE, please refer to the following steps:

2. Assigning a static IP address to your computer, like 192.168.0.10/255.255.255.0

3. Launch a web browser, enter 192.168.0.254 in the address bar and press the Enter Key. Enter admin (all lowercase) for both username and password to login.

Here is a FAQ which provides a detailed setup walkthrough: https://www.tp-link.com/support/faq/710/

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Recommended Solution

hamadah123

LV1

2024-08-03 08:06:57

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-08-02

Re:cant connect to IP for device using 192.168.0.254

2024-08-03 08:06:57

Snapper-69 wrote

cant connect to the cpe ip address, have used these in the past but now cant configure the devices

@Snapper-69

johnjackee

LV1

2024-08-11 12:47:55

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-08-11

Re:cant connect to IP for device using 192.168.0.254

2024-08-11 12:47:55

Have you tried resetting the device or checking if it’s on the same IDM Crack Download network segment as your computer? Sometimes a simple reboot or IP conflict can cause connection issues.

jenniferhop12

LV1

2024-09-05 14:02:57

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-04

Re:cant connect to IP for device using 192.168.0.254

2024-09-05 14:02:57

It might help to check if the IP address has changed or if there's a conflict with hire dedicated seo expert another device on the network. Also, try resetting the CPE210 to its default settings and then reconnecting.