Question about "Profile" for switch port that connects to OC200
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
NOTE: I could not enter the TL-SG2210MP as the "Model", but my question should apply to either switch.
As shown, I'm using an "All" profile for the "uplink" ports on the switches (to include all VLANs), but I'm not certain about the proper profile for the port that connects to the OC200. I'm currently using the "All" profile (and it all seems fine), but should I instead use the "LAN" profile? (LAN(1) is the Admin network).
Thanks!
Hi @HookEm
Thanks for posting in our business forum.
As MR.S has already answered your question.
If you have questions about this, you may check out the Help Center.
You can also see the explanation of the profile. It is mainly about your 802.1Q VLAN settings.
Hi @HookEm
Thanks for posting in our business forum.
As MR.S has already answered your question.
If you have questions about this, you may check out the Help Center.
You can also see the explanation of the profile. It is mainly about your 802.1Q VLAN settings.