OpenVPN to ARCHER MR200 with non-static ip

OpenVPN to ARCHER MR200 with non-static ip

OpenVPN to ARCHER MR200 with non-static ip
OpenVPN to ARCHER MR200 with non-static ip
2024-06-30 05:15:03 - last edited 2024-06-30 05:21:54
Model: Archer MR200  
Hardware Version: V4
Firmware Version:

I have 6 AC750 Wireless Dual Band 4G LTE Router Archer MR200(EU) ver 4.0

 

I want to connect for each of them using OpenVpn, but they do not have a static ip (connected to Internet using SIM)

 

I understand I need to set DDNS by bind router to TPLINK cloud. With that way I can manage the router remotely too.

 

The problem is I don't find register TPLINK cloud into router web browser 

 

  4      
  4      
#1
Options
3 Reply
Re:OpenVPN to ARCHER MR200 with non-static ip
2024-07-04 11:31:14

  @Yolop 

Hi

 

Sorry, MR200 V4 does not support binding TP-Link ID.
The ddns supported by MR200 are noip and DynDns, which are registered directly through third-party websites and have nothing to do with TP-link ID. So if you want to bind ddns, you can still bind it normally.

  0  
  0  
#3
Options
Re:OpenVPN to ARCHER MR200 with non-static ip
2024-07-04 13:59:06

  @Joseph-TP noip and DynDns are cost money. 

DynDns allow 1 free ddns.

I need to manage 6 routers.

Ok

  0  
  0  
#4
Options
Re:OpenVPN to ARCHER MR200 with non-static ip
2024-07-05 02:38:08

  @Yolop 

Hi

 

I understand your concern and I would like to suggest considering the option of purchasing the MR600, which supports binding TP-Link ID and offers unified management through the Tether app. This would provide you with the features you are looking for and an improved overall experience.

Additionally, it may be worth considering returning your MR200 router. If you have any further questions or need assistance, please feel free to reply.

Warm regards.

  0  
  0  
#5
Options