Official Release Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability
Hello Everybody,
A new firmware has been released for the Archer BE550 recently with a few fixes you will likely be interested in, including fixes for a few of the behaviors reported on the forums.
This Article applied to:
Archer BE550 V1/V1.6
Modifications and Improvement
This firmware introduces the wireless firmware update, enhances system stability, and optimizes MLO network stability.
1. Updated wireless firmware to fix related instability issues.
2. Fixed the MLO disconnection issue with the Samsung S24U and other similar WiFi 7 clients.
3. Updated default encryption to WPA2/WPA3 for main 2.4G and 5G Wi-Fi networks.
4. Fixed the bug allowing clients on Guest Wi-Fi to access USB sharing in AP mode.
5. Enhanced VPN stability.
6. Fixed the issue where tether clients show no clients in special cases.
7. Improved app performance with server request optimizations.
8. Fixed the issue where DDNS stops working in special cases.
Check for an Update to Your Routers Firmware, Or Download and Apply the Firmware Manually from Your Device's Download Page
Firmware Download:
Before the Upgrade
(1) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
Direct Firmware Download Link
You can also download the firmware from the below link directly and update manually:
Archer BE550_V1/V1.6_1.0.11 Build 20240807
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Model, hardware version, and firmware version of your router.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
B777-300ER wrote
I have the BE9300, aka BE550 v1 (however, the label on the router states it is v1.6, but the firmware update page states it's Archer BE550 v1.0).
My question pertains to DoH/DoT. I saw that BE550 has a PRO version that supports secure DNS functionality, but it seems the most current firmware of this router does not support DoH/DoT. Would someone verify this is indeed the case to verify I'm not doing something wrong please?
The lack of secure DNS support for a fairly new-release router is disappointing. Unfortunately, I'm beyond the 30-day return period (Amazon) since it sat in the box a while before I set it up. Is the intent to make this available via another firmware update or are we out of luck? The answer to that question will be helpful as I may pursue a refund under my credit card's buyer's assurance program and start over again (groan.)
@B777-300ER Is the model number Archer BE9300 with hardware version V1.6 printed on the bottom sticker of the device?
Since BE9300 is designed and released for the US market, I would recommend checking with the US community for more information. I apologize that I cannot confirm whether it will support DoH/DoT at this time.
- Copy Link
- Report Inappropriate Content
@Kevin_Z It is. Apologies, I thought I was on the US message board.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 5687
Replies: 32