Re450 shutdown 2.4 ghz ssid
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello
As in subject, i have configured re450 to extend 2.4 and 5 ghz network of the main router with different ssid. I noticed that every day suddenly 2.4 extended signal disappear, seems that extender shutdown arbitrarily the 2.4 signal. So many client drop because they doesnt support 5 ghz. I think is a behavior correlated to high speed mode. Any idea?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi@Gigiooo,
If you are experiencing intermittent wireless connection on the range extender, please refer to the following suggestions:
1. Confirm the extender is properly located based on How to place your wireless Range Extender for optimal reception and performance.
2. Make sure the firmware on the extender is up-to-date.
3. Enable “High Speed” mode.
4. Disable Parental Control or Access Control (Blacklist/ Whitelist) on the host router if they have been enabled for the extender.
5. Turn off Band Steering (also called "Smart Connect" or "Whole-Home Wi-Fi") and set up different Wireless names for the router's 2.4Ghz and 5Ghz Wi-Fi.
6. Fix the wireless channels on the host router, such as channel 11 for 2.4GHz.
- Copy Link
- Report Inappropriate Content
Hi@Gigiooo,
If you are experiencing intermittent wireless connection on the range extender, please refer to the following suggestions:
1. Confirm the extender is properly located based on How to place your wireless Range Extender for optimal reception and performance.
2. Make sure the firmware on the extender is up-to-date.
3. Enable “High Speed” mode.
4. Disable Parental Control or Access Control (Blacklist/ Whitelist) on the host router if they have been enabled for the extender.
5. Turn off Band Steering (also called "Smart Connect" or "Whole-Home Wi-Fi") and set up different Wireless names for the router's 2.4Ghz and 5Ghz Wi-Fi.
6. Fix the wireless channels on the host router, such as channel 11 for 2.4GHz.
- Copy Link
- Report Inappropriate Content
Hello, i confirm all your points. Also channel set always on 11.
2.4 and 5 have different ssid
Now 5ghz from re450 is functioning but i cant see 2.4 despite all 3 leds on ext are ok.
Now i try to reboot extender and let you know
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
So again... Need to restart re to get 2.4 back.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 350
Replies: 4
Voters 0
No one has voted for it yet.